• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Getting close: non running mustang issue

  • Thread starter Thread starter N8Miller
  • Start date Start date Nov 9, 2005

N8Miller

I need NOS....make it 2 of the big ones
Founding Member
Jul 26, 2000
2,661
0
0
Kingston, PA, USA
Nov 9, 2005
#1
  • Nov 9, 2005
  • #1
Ok, for those that have helped me out on this topic (jrichker, rick91gt, others), i have my updates.
below is a bit of all the wires on the eec relay, just taken out of their harness.

labeled #1: not positive on this one, but could be ground?
labeled #2: injectors (orange) and pin #37 on eec
labeled #3: goes to the alt.
labeled #4: hot at all times

now, where i come to the crossroads is that when i have them all hooked up to the correct spots on my relay (the one from autozone, which could be faulty from the start), it wont fire. BUT, when i have them all connected and slightly move #1 and #2 together, FP primes, and i can hit the turn it over to start.

why does it start when i "jump" the wires? bad relay? i got some "wire drier" from the parts store and some steel brushes and cleaned all the connectors off good and used my needle nose pliers to make sure the connectors are tight.

where should i go?

here is the wiring diagram that jrichker has provided me with a few weeks ago...
 

Attachments

  • car problem-1.webp
    82.5 KB · Views: 212

2000xp8

SN Certified Technician
Aug 8, 2003
8,075
1,658
194
NJ
Nov 9, 2005
#2
  • Nov 9, 2005
  • #2
Nate, your problem sounds like it's either real simple or real difficult.
Why not goto the ford dealer and just buy a real relay? At least that will elimate the possiblity that the relay was DOA
 

N8Miller

I need NOS....make it 2 of the big ones
Founding Member
Jul 26, 2000
2,661
0
0
Kingston, PA, USA
Nov 10, 2005
#3
  • Nov 10, 2005
  • #3
2000xp8 said:
Nate, your problem sounds like it's either real simple or real difficult.
Why not goto the ford dealer and just buy a real relay? At least that will elimate the possiblity that the relay was DOA
Click to expand...

i was there, its $26. i do and dont have the money, so i am trying to see if the problem is obvious to anyone before i drop the money.
 
T

TheUser

Active Member
Jul 25, 2003
1,859
1
36
Springfield, MO
Nov 10, 2005
#4
  • Nov 10, 2005
  • #4
I can't see the thumbnails w/ the images you have labels on, so that leaves me in the dark.

Kinda obvious and I'm sure you would have done this already, but - you might try to swap EEC relays w/ someone you know w/ a 5.0 and see if that fixes the problem.

Sounds like a bad connection to me - not sure what else would cause it to work when you "move 1 and 2 together"....just thinking out loud...hope this helps, if not, sorry.
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Nov 10, 2005
#5
  • Nov 10, 2005
  • #5
Anytime you deal with troubleshooting wiring, you need the wire color codes complete with tracer stripe colors. Once we know what those colors are, we can help you.
 

N8Miller

I need NOS....make it 2 of the big ones
Founding Member
Jul 26, 2000
2,661
0
0
Kingston, PA, USA
Nov 10, 2005
#6
  • Nov 10, 2005
  • #6
jrichker said:
Anytime you deal with troubleshooting wiring, you need the wire color codes complete with tracer stripe colors. Once we know what those colors are, we can help you.
Click to expand...

open the thumbnail, it has a clear pic with wires numbered.
 
You must log in or register to reply here.

Similar threads

T
Electrical Brown Connector #31
  • ta66
  • Jul 26, 2026
  • Fox 5.0 Mustang Tech
Replies
2
Views
219
Fox 5.0 Mustang Tech Jul 30, 2026
ta66
T
Engine Fuel not pumping
  • Creomod
  • Apr 13, 2026
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
51
Views
2K
Fox 5.0 Mustang Tech Jul 22, 2026
Noobz347
B
Electrical Why does my fox body keep frying eecs
  • brandyn200
  • Jun 20, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
518
Fox 5.0 Mustang Tech Jun 25, 2026
AeroCoupe
G
Resolved Smoking Wiring Issue After GT40 Head Swap
  • Grapes
  • Aug 15, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
589
Fox 5.0 Mustang Tech Aug 22, 2026
Grapes
G
M
Electrical 93 5.0 No Injector Pulse
  • machinermac
  • Jul 26, 2026
  • Fox 5.0 Mustang Tech
Replies
15
Views
518
Fox 5.0 Mustang Tech Aug 1, 2026
Willybill32
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?