Hey. Putting '89 engine in my '86 GT. I just want to get the car running on the cheap. I will be overhauling, (bearings, rings, gasket set) the engine. Will be using the stock E7 heads for now. Car is a 5-speed. Here is the question; can I run the ANDERSON N-41 cam with the stock heads and 1.6 rockers without clearance issues? Back in the '90's I had an '89 LX that had; Edelbrock intake, big mass air, TB, B-303, 1.6 rockers, long tubes and 4.10 gear with a tremec. Was fun. Not fast, but fun. I just want to get my '86 running again. I will be installing TFS TW heads soon after I get some extra $$. Thanks in advance.