goals/projects for 07

wicked93 · Jan 18, 2007

So what has everybody been up to this winter any new projects, goals and so on I am hoping to have my new combo up and running this spring

AllFordPerf · Jan 18, 2007

Don't keep us in suspense Phil, What's your combo this year?

2004mysticobra · Jan 18, 2007

Gotta get my 93s interior up to par. Just finished lowering it last night. Exhust will be tonight. The cam will be a bit as I still need some parts.

PDXStangDude · Jan 18, 2007

LT headers with catted X pipe and hopefully new Wheels and tires...

I have CMDP's ready for install but I think I will wait until I get the LT's and do it all at once. Save me some $$$ on the tune.

I also have billet pedals and caliper paint with caliper mustang decals to do.

MyFordsFly · Jan 18, 2007

10s, first time out, 10s.

loud 95 · Jan 18, 2007

If I keep the '95, I want to at least finish the suspension, chassis and brake work. I also want to ad the suspension lift, atlas II, and the IFS dana 44 to the bronco II.

wicked93 · Jan 18, 2007

AllFordPerf said:
Don't keep us in suspense Phil, What's your combo this year?

turbo almost have all the parts to put the motor together. The turbo and heads are being built. I am back to my original plan except it will be put into my 90 notch have no idea what it will run but have some hopes and since I have no secrets it is a 393ci with a 76mm turbo, fox lake cnc ported vic jr's, solid roller custom turbo cam, super victor intake set up for efi still need the elbowand 90mm tb and plan on running a power glide tranny . all I need to finish the motor is lifters, pushrods, timing chain, and rockers. once I get the trans bought hope to put the motor and tranny in the car so I can finish fabricating the little stuff that always seems to take for ever. the fuel system and the dfi are the last things I will buy.
I am really looking forward to racing this year since last year was not able to race much at all. I know everybody is stepping up there combos this year so was just seeng what was going on that is all

AllFordPerf · Jan 18, 2007

Sounds like it should be an animal. Are you going with a turbo kit or a custom set up? Is this going to be a street car?

TurboSnake95 · Jan 18, 2007

Mustang78 · Jan 18, 2007

i want to build up a 306 and slap it in my car..it would be nice if i fixed this axle this weekend..thats about it, i set my goals low so i dont disappoint myself...i also want to go to the seattle raceway and see what my car runs at least once

~Mark~

tsoccer3299 · Jan 18, 2007

putting my nonexistent welding skills to work and making a turbo set-up

saleenster · Jan 18, 2007

TurboSnake95 said:
9's

I hope too be there when it happens.

wp331 · Jan 18, 2007

hello everyone this is my first post but I' been around here for ever... I'm planning on running in DR this year with the 93 and selling the 2000 gt for funds looking forward to more racing this year.
walter

Juiced87Notch · Jan 18, 2007

my goal is to actually race this year lol. I need to fix/change a few things on the 87 and go through the nitrous system and make sure it works and hopefully I should be good to go.

AllFordPerf · Jan 18, 2007

My personal goal is to get my turbo car into the low 10's on a 235 drag radial and win as many heads up NW races as possible. Also to tune Wally and Ray's turbo cars into the 7's and Randys turbo car into the 8's.

Midnightmotorsports · Jan 18, 2007

Be right there with jeff, but hiding enough more nitrous to win, just by a little. And drive it to and from the track.

charged9250 · Jan 18, 2007

Everyone wants a turbo!! Eaton all the way!!!! hehehe...

loud 95 · Jan 19, 2007

wicked93 said:
turbo almost have all the parts to put the motor together. The turbo and heads are being built. I am back to my original plan except it will be put into my 90 notch have no idea what it will run but have some hopes and since I have no secrets it is a 393ci with a 76mm turbo, fox lake cnc ported vic jr's, solid roller custom turbo cam, super victor intake set up for efi still need the elbowand 90mm tb and plan on running a power glide tranny . all I need to finish the motor is lifters, pushrods, timing chain, and rockers. once I get the trans bought hope to put the motor and tranny in the car so I can finish fabricating the little stuff that always seems to take for ever. the fuel system and the dfi are the last things I will buy.
I am really looking forward to racing this year since last year was not able to race much at all. I know everybody is stepping up there combos this year so was just seeng what was going on that is all

Sounds awesome Phil. Are you planning on only running pump gas with this engine?

ddonaca351 · Jan 19, 2007

I finished landscaping my back yard, before the snows hit.... does that count?
- over 400 feet of edging, 6 yards of river rock, and removed a ton of old sod.

Hmmm...

Rebuilt my Kawi, after I knocked all the shine off it.

Painted and buffed the block and heads for my 70. (4 coats of Ford Blue, that shines like a new dime)
- also got ahold of the intake and valve covers that I wanted, but haven't done anything with them yet...

Nothing really neat though.
DD

The Factor · Jan 19, 2007

Best goal I can think of is Enjoying life at its fullest

goals/projects for 07

wicked93

AllFordPerf

New Member

2004mysticobra

New Member

PDXStangDude

Member

MyFordsFly

loud 95

New Member

wicked93

AllFordPerf

New Member

TurboSnake95

Mustang78

New Member

tsoccer3299

Member

saleenster

wp331

Member

Juiced87Notch

Member

AllFordPerf

New Member

Midnightmotorsports

Member

charged9250

loud 95

New Member

ddonaca351

Active Member

The Factor

New Member

Similar threads

goals/projects for 07

New Member

New Member

Member

New Member

New Member

New Member

Member

Member

Member

New Member

Member

New Member

Active Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency