• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

good or bad combo

  • Thread starter Thread starter pa308
  • Start date Start date Jan 26, 2006
P

pa308

New Member
Jan 26, 2006
45
0
0
Jan 26, 2006
#1
  • Jan 26, 2006
  • #1
hi im new here but what u think about my enigne combo. stock roller block .40 over align honed zero decked torque plate honed. I m using cp lite weight pistons with total seal gapless rings and eagle ibeam rods.A stock crank cut .10 and .10 micro polished journals chamfered oil holes.Gt40 heads with a 5angle valve job and 1.72 cobra rockers.I also have a Z cam.Im using a wingage tray and main girdle with a 7 quart pan. Up top a holley intake, 75 maf, 75throttle body, and 30lb injectors. How much power at the flywheel.Sorry for long post ,i dont have desktop dyno yet.Thanks guys
 

nmcgrawj

Advanced Member
Sep 28, 2003
3,651
4
68
Indianapolis, IN
Jan 26, 2006
#2
  • Jan 26, 2006
  • #2
How about you skip desktop dyno and go to the real dyno? Or even better....the track?
 
N

nidyanazo

Banned
Mar 30, 2005
149
2
0
805 dawg
Jan 27, 2006
#3
  • Jan 27, 2006
  • #3
ha! Sounds like a nice combo.
 

nmcgrawj

Advanced Member
Sep 28, 2003
3,651
4
68
Indianapolis, IN
Jan 27, 2006
#4
  • Jan 27, 2006
  • #4
It seems like that cam and intake are pretty big for those heads. I would think that those heads would like to make power down low where as that intake is VERY strong up top to go along with that cam. Although im not positive, i dont know much about those heads just taking a guess.
 
P

pa308

New Member
Jan 26, 2006
45
0
0
Jan 27, 2006
#5
  • Jan 27, 2006
  • #5
i am thinking the same im just ising them to get by im not done building yet but hopefully soon.eventualy im swithching over to afr185 and port matching the intake. i hope to run mid to low 11s
 

nmcgrawj

Advanced Member
Sep 28, 2003
3,651
4
68
Indianapolis, IN
Jan 27, 2006
#6
  • Jan 27, 2006
  • #6
So this isnt even running? Just a planned combo?

In my opinion if i put that much cash into a motor...i would have a custom cam. People dont speak too highly of those ford racing cams.
 
3

304billet

Member
Sep 16, 2005
315
1
16
Jan 27, 2006
#7
  • Jan 27, 2006
  • #7
Holley intake and 30lbers r too big for a NA 306, those GT 40 heads r too small. MAF needs to be larger than TB.

I would go with TW 185 cnc'd heads or AFR 185's, Z cam or Comp cam XE282HR and a port matched RPM ll, 24's, 70mm TB and 75mm MAF.

u could hit 350/350 or more @ the RW with the right combo and 10:1 comp.
 
P

pa308

New Member
Jan 26, 2006
45
0
0
Jan 27, 2006
#8
  • Jan 27, 2006
  • #8
thanks for the help im running 10.5 compression. my brother ran same engine made 300rwhp at 6000 went 11.90 at 113.only difference was heads he had windsor sr. on the dyno he was running lean up top so wouldnt u need more fuel he never had a tune for it just stock computer
 
You must log in or register to reply here.

Similar threads

S
  • Locked
1994 Mustang GT/331 C4/Las Vegas/$10,500
  • semperfi3533
  • Sep 20, 2011
  • SN95 Mustangs For Sale (1994-04)
Replies
1
Views
2K
SN95 Mustangs For Sale (1994-04) Sep 20, 2011
semperfi3533
S
L
  • Locked
SHOW CAR!! ...1988 Mustang LX-49K MILES(331 Stroker/TKO600/31 Spline/Willwood) TX
  • LS3vette
  • Nov 13, 2011
  • Fox Body Mustangs For Sale (1979-93)
Replies
6
Views
8K
Fox Body Mustangs For Sale (1979-93) Dec 25, 2011
pack018
P
5
  • Locked
1994 Mustang GT Built. 331, C4, coilovers, gears,spool etc.
  • 5.0 gt dreamer
  • May 19, 2011
  • SN95 Mustangs For Sale (1994-04)
Replies
7
Views
5K
SN95 Mustangs For Sale (1994-04) Sep 7, 2011
SQUEEZE&STROKE
  • Locked
88 Mustang LX Highly Modified Street Machine
  • soontobefastfox
  • Jul 18, 2011
  • Fox Body Mustangs For Sale (1979-93)
  • 2
Replies
25
Views
12K
Fox Body Mustangs For Sale (1979-93) Sep 16, 2011
LS3vette
L
Not another one...need some help...
  • SQUEEZE&STROKE
  • Jun 2, 2008
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
12
Views
949
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 2, 2008
69clark
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?