Got another pair of 94/95 spindles today, why are these diff though??

[caseywan]

I had gotten 2 pairs of 94/95 spindles a few weeks ago from the junk yard. I went again today and got another pair of spindles off a 94 Mustang, only these ones are different. They have some kind of electrical connector coming off them and a sensor by the hub and the hubs have some sort of 'splines' or something on them. I ran the part numbers, so I know for sure that all 3 pairs that I have are all 94/95 spindles. So is there any difference?

 

[Bad92GT]

abs is all that could be different

 

[GSP393]

It's abs, I've bought some TC spindles that are the same as 87-93 GTs except for the abs sensor.

 

[Juiced87Notch]

It's abs, I've baught some TC spindles that are the same as 87-93 GTs except for the abs sensor.

yup the wires go to a pickup that reads off of those splines

 

[caseywan]

Ok, gotcha. Thanks

 

[dec322]

Wow

I wish I could go to a junkyard and get this stuff as easy as you've done it. I think every junkyard in Birmingham has stripped mustangs. EVERYTHING is gone.

 

[caseywan]

Yeah, I got a buddy that lives outside Birmingham and he says he can't find crap for Mustangs in the bone yards.

 

[GSP393]

I'm not going to use the TC spindles so if anybody needs them, shoot me a pm. Also have a TC 4 lug disk 8.8 w/355 gear.

 

[Snikt89GT]

Wow

I wish I could go to a junkyard and get this stuff as easy as you've done it. I think every junkyard in Birmingham has stripped mustangs. EVERYTHING is gone.

Same here. I've never seen a 5.0 mustang with an engine, brakes, or rear end in it, ever.

Hardly ever see any 94+ cars at all. It's all 79-93 4cyl beaters.

 

[caseywan]

I'm not going to use the TC spindles so if anybody needs them, shoot me a pm. Also have a TC 4 lug disk 8.8 w/355 gear.

By TC, I assume you mean Turbo Coupe... I'm not positive but I don't think those spindles will work on a Fox. I know the rear end will though.