Got another pair of 94/95 spindles today, why are these diff though??

C

caseywan

Member

Apr 7, 2006

157

0

17

Chicago, IL

Oct 16, 2006

#1

• Oct 16, 2006

• #1

I had gotten 2 pairs of 94/95 spindles a few weeks ago from the junk yard. I went again today and got another pair of spindles off a 94 Mustang, only these ones are different. They have some kind of electrical connector coming off them and a sensor by the hub and the hubs have some sort of 'splines' or something on them. I ran the part numbers, so I know for sure that all 3 pairs that I have are all 94/95 spindles. So is there any difference?

 

Bad92GT

The 5 Minute Plan Man

Jun 10, 2004

492

0

0

SC

Oct 16, 2006

#2

• Oct 16, 2006

• #2

abs is all that could be different

 

GSP393

New Member

Aug 14, 2006

217

0

0

Orange County, Texas

Oct 16, 2006

#3

• Oct 16, 2006

• #3

It's abs, I've bought some TC spindles that are the same as 87-93 GTs except for the abs sensor.

 

Juiced87Notch

Member

Sep 30, 2004

500

0

16

Gresham, Oregon

Oct 16, 2006

#4

• Oct 16, 2006

• #4

GSP393 said:

It's abs, I've baught some TC spindles that are the same as 87-93 GTs except for the abs sensor.

Click to expand...

yup the wires go to a pickup that reads off of those splines

 

C

caseywan

Member

Apr 7, 2006

157

0

17

Chicago, IL

Oct 16, 2006

#5

• Oct 16, 2006

• #5

Ok, gotcha. Thanks

 

D

dec322

Member

Feb 11, 2006

401

2

16

Bham AL

Oct 16, 2006

#6

• Oct 16, 2006

• #6

Wow

I wish I could go to a junkyard and get this stuff as easy as you've done it. I think every junkyard in Birmingham has stripped mustangs. EVERYTHING is gone.

 

C

caseywan

Member

Apr 7, 2006

157

0

17

Chicago, IL

Oct 16, 2006

#7

• Oct 16, 2006

• #7

Yeah, I got a buddy that lives outside Birmingham and he says he can't find crap for Mustangs in the bone yards.

 

GSP393

New Member

Aug 14, 2006

217

0

0

Orange County, Texas

Oct 16, 2006

#8

• Oct 16, 2006

• #8

I'm not going to use the TC spindles so if anybody needs them, shoot me a pm. Also have a TC 4 lug disk 8.8 w/355 gear.

 

Snikt89GT

New Member

Sep 6, 2006

264

1

0

Deland, Florida

Oct 16, 2006

#9

• Oct 16, 2006

• #9

dec322 said:

Wow

I wish I could go to a junkyard and get this stuff as easy as you've done it. I think every junkyard in Birmingham has stripped mustangs. EVERYTHING is gone.

Click to expand...

Same here. I've never seen a 5.0 mustang with an engine, brakes, or rear end in it, ever.

Hardly ever see any 94+ cars at all. It's all 79-93 4cyl beaters.

 

C

caseywan

Member

Apr 7, 2006

157

0

17

Chicago, IL

Oct 16, 2006

#10

• Oct 16, 2006

• #10

GSP393 said:

I'm not going to use the TC spindles so if anybody needs them, shoot me a pm. Also have a TC 4 lug disk 8.8 w/355 gear.

Click to expand...

By TC, I assume you mean Turbo Coupe... I'm not positive but I don't think those spindles will work on a Fox. I know the rear end will though.