Granada strut arms?

bobgrinex

New Member
May 26, 2007
1
0
0
I am picking up a 66 mustang parts car, the body was in remarkably good shape for New England, but the car was used as a donor for his pair of fastbacks. So the entire suspension is now gone for the 5 lug setup it had. Plus alot of small stuff that I was probably going to replace anyway or already have.

I have a 77 Grr-nada parts car with a ton of spares. Now, perhaps when I go to pick the mustang up some of the front end will appear, but as of right now the strut rods are gone, the steering is gone, and the rear axle is missing. I fully intended to replace the c-arms, tie rods, maybe the centerlink and defintely the idler arms anyway. Can I use the strut rods off of the granada, and will the granada's power steering box and ram work if I get custom hoses made up? I figure on using the granada's 8" rear end with new springs in the rear. What else can I rob off of the granada to replace a completely missing suspension?
 
the only things that will work from the granada on a 66 would be the rearend and the front spindles. none of the suspension stuff will work on a 66. now, if you had a 67 or later mustang most of the suspension and steering from the granada would work but still not all of it.