• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Griffen Universal Radiator Size

  • Thread starter Thread starter 93 LX
  • Start date Start date Jul 29, 2007

93 LX

Founding Member
Jun 2, 2000
3,081
3
0
Norwalk, CA.
Jul 29, 2007
#1
  • Jul 29, 2007
  • #1
With Summer being in full swing now and the fact I fixed my AC my 93 Steed is running a bit hot in stop and go traffic. Although it does not over heat it does get too hot for my comfort level.

I do not have any mods on my ride other then headers and a heavy right foot I feel that my 3 core brass radiator, high flow WP with a Cobra pulley and a IST (mass-air.com) Supercool fan kit. My ride does get hot when in standing traffic. I feel the issue is more of a airflow issue but i do not want to install a pusher fan just for AC. If i can get clear and up tp freeway speeds the eingine will come back down to normal temps (middle of stock guage).

My question is what size of universal griffen radiator do I get for the mustang? Also what mods or fabs will I will need to do to use the stock fan shroud and and stock mounts or can I even use the stock mounts?

Thanks
Allen
 

5spd GT

"the 5.0 owns all"
Founding Member
Aug 7, 2002
9,516
6
99
Arkansas
Jul 29, 2007
#2
  • Jul 29, 2007
  • #2
I use the Griffin 31x19 "Oval Style" radiator...

I had to trim the lower hose down a few inches to keep it from kinking and bend out the a/c condensor lines to the side to slide in the 31"...

It was probably one of the best mods I have did, it cooled my car down greatly over my old stock radiator on the highway...
 
H

HaynStang

New Member
Dec 16, 2006
124
0
0
Portland
Jul 29, 2007
#3
  • Jul 29, 2007
  • #3
31" x 19" radiator.... I believe Summit advertised it as a "NASCAR type radiator" or something to that affect.

Reverse your lower radiator hose and trim an inch or two off of the end and it will fit fine. You may need to bend your radiator brackets open wider and gently push your a/c lines to the side a bit. The Griffin is a tight fit but it fits well. The stock fan shroud and coolant resivor will work fine. I used my stock U shaped clips on the bottom of the shroud (to clip to the lip on the radiator) and sheet metal screws at the top to bolt the shroud through the radiator. A better option might be to use some real small bolts and nuts instead, or U shaped clips that you can tighten somehow.
 

5spd GT

"the 5.0 owns all"
Founding Member
Aug 7, 2002
9,516
6
99
Arkansas
Jul 29, 2007
#4
  • Jul 29, 2007
  • #4
HaynStang said:
31" x 19" radiator.... I believe Summit advertised it as a "NASCAR type radiator" or something to that affect.

Reverse your lower radiator hose and trim an inch or two off of the end and it will fit fine. You may need to bend your radiator brackets open wider and gently push your a/c lines to the side a bit. The Griffin is a tight fit but it fits well. The stock fan shroud and coolant resivor will work fine. I used my stock U shaped clips on the bottom of the shroud (to clip to the lip on the radiator) and sheet metal screws at the top to bolt the shroud through the radiator. A better option might be to use some real small bolts and nuts instead, or U shaped clips that you can tighten somehow.
Click to expand...

That's correct, I forgot about a couple of those additional things you needed to do, it has been a while since I added it

Yeah, the Nascar style is right, that is why I called it the Oval style...Nascar is more accurate though
 

93 LX

Founding Member
Jun 2, 2000
3,081
3
0
Norwalk, CA.
Jul 29, 2007
#5
  • Jul 29, 2007
  • #5
Thanks for the replys. I just saw that Summit has a brand of their own name. Its 289 for a "direct fit". Anyone know anything about these? The universal Griffin is 269 but is the Summit is as good quality as the Girffin then 20 bucks is worth it for me. What do you think?

Allen
 

5spd GT

"the 5.0 owns all"
Founding Member
Aug 7, 2002
9,516
6
99
Arkansas
Jul 29, 2007
#6
  • Jul 29, 2007
  • #6
Maybe the prices have changed by mine ran around $189 I think......plus you got to buy the radiator cap as well though, at 16psi.
 

93 LX

Founding Member
Jun 2, 2000
3,081
3
0
Norwalk, CA.
Jul 29, 2007
#7
  • Jul 29, 2007
  • #7
there is another girffin but its not the oval one. It is 195, may - june 2007 Summit catalog.
 

5spd GT

"the 5.0 owns all"
Founding Member
Aug 7, 2002
9,516
6
99
Arkansas
Jul 29, 2007
#8
  • Jul 29, 2007
  • #8
This is the Griffin Radiator I have...

http://store.summitracing.com/partd...72-X&N=700+300673+4294792824+115&autoview=sku

Part number:
GRI-1-26272-X

$195 is the list price...

Order a 16psi radiator cap, I got the griffin brand to match.
 

Rick 91GT

Mustang Master
Nov 29, 1999
9,692
95
99
PA
Jul 30, 2007
#9
  • Jul 30, 2007
  • #9
The Afco universal pieces work as well with just about the same modifications.... They were farily cheap in the past as well... $185.95

http://www.afabcorp.com/AFCO_Dynate...Product_Code=80102FN&Category_Code=dr_uni-rad
 
S

Sicarius428

Active Member
Jan 6, 2004
2,085
5
49
Jul 30, 2007
#10
  • Jul 30, 2007
  • #10
The griffin unit is the 31x19 as said above. The problem I think is that you don't have enough fan to keep up... The problem that you stated above is typically because your fan cannot pull enough air through the radiator. If you are able to keep your temps down on the freeway your radiator is doing your job just fine. Which waterpump do you have? I had a problem with a high flow Milidon unit which would flow just fine when the engine was going but at idle it just couldn't get enough water though the motor. Also compounded by the fact that I had UD pullies. A stewart waterpump solved that problem.
Kevin
 

85_SS_302_Coupe

it sucks (I know) to be on the receiving end
15 Year Member
Nov 11, 2003
6,945
1,598
223
Northern KY
Jul 30, 2007
#11
  • Jul 30, 2007
  • #11
An important detail to pay attention to with universal radiators is the filler cap. If the cap is straight level with the top of the radiator, chances are your hood won't close. You need the slanted 45* filler cap like the stocker has.
 
S

Sicarius428

Active Member
Jan 6, 2004
2,085
5
49
Jul 30, 2007
#12
  • Jul 30, 2007
  • #12
I fortunately do not have any problems with my radiator cap hitting my hood. Nor did my friend with his 5.0 with the griffin radiator and griffin cap.
Kevin
 

5spd GT

"the 5.0 owns all"
Founding Member
Aug 7, 2002
9,516
6
99
Arkansas
Jul 30, 2007
#13
  • Jul 30, 2007
  • #13
No clearance here at all either - Griffin Radiator and Griffin cap...
 
S

Sicarius428

Active Member
Jan 6, 2004
2,085
5
49
Jul 31, 2007
#14
  • Jul 31, 2007
  • #14
If you get a griffin radiator, get the griffin cap. A stant will not seal at all because for some reason the griffin is longer.
Kevin
 

85_SS_302_Coupe

it sucks (I know) to be on the receiving end
15 Year Member
Nov 11, 2003
6,945
1,598
223
Northern KY
Jul 31, 2007
#15
  • Jul 31, 2007
  • #15
I should have clarified that i wasn't saying specifically that the Griffen had clearance issues....in fact i'm not sure what brand my buddy's was that he used....just saying better safe than sorry.
 

ras50gt

Member
Oct 25, 2005
200
2
19
Jul 31, 2007
#16
  • Jul 31, 2007
  • #16
I have had a summit universal radiator for years now and love it. It keeps my car cool and have had no problems with it. I bought the 31 x 19, price was I believe 179 or 189 when I got it but I actually think the prices went down. Like others mentioned there were some fitment issues but nothing bad. You could always get the size smaller which is 27 x 19, prob be perfect. You will need to get a radiator hose drain, I still need to get one. Griffin also has radiators in both sizes, they are a little more expensive now. But overall, for the price they are the way to go. I wouldn't bother with the direct fit ones.
 
H

HaynStang

New Member
Dec 16, 2006
124
0
0
Portland
Jul 31, 2007
#17
  • Jul 31, 2007
  • #17
5spd GT said:
This is the Griffin Radiator I have...

http://store.summitracing.com/partd...72-X&N=700+300673+4294792824+115&autoview=sku

Part number:
GRI-1-26272-X

$195 is the list price...

Order a 16psi radiator cap, I got the griffin brand to match.
Click to expand...

That's the one I have too. And yeah, you'll need a matching Griffin cap, 16 psi, part number GRI-KM-70:

http://store.summitracing.com/partd...&part=GRI-KM-70&N=700+400030+115&autoview=sku

I have no hood clearance issues with this setup either. The 31X19" is really the perfect fit for a Fox if you want a big radiator.

A couple other things worth knowing about the Griffin rad:

1- There's no drain petcock built in. No big deal, you'll just need to pull your lower hose if you need to drain your coolant. Or, a radiator shop may be able to add a petcock if you want to spend the money.

2- The lower radiator hose outlet is 1 3/4" which means the hose will be a tight fit (stock radiator inlet and outlets are both 1 1/2"). The hose will stretch to fit, it'll just be a PITA the first time you do it. Get some radiator hose lubricant at a parts store if you can find it- I believe I ended up using some WD40, which worked OK in a pinch. Fortunately the next time you have to re-attatch the lower hose on the Griffin it'll go back on a lot easier... time and heat will make the hose conform to the bigger outlet just fine.

Ok... I think that's just about everything there is to know.
 

88DragStang

New Member
Apr 14, 2006
5
0
0
Mississippi
Jul 31, 2007
#18
  • Jul 31, 2007
  • #18
I have a almost brand new 31x19 direct fit grffin radiator in my stang i will see it if you need it for 130 bucks
 
You must log in or register to reply here.

Similar threads

Resolved 93 Mustang 5.0 - Cranks but does not start
  • dan50
  • Jul 18, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
491
Fox 5.0 Mustang Tech Jul 18, 2026
dan50
A
Blow through intercooled questions
  • AngryH58
  • Aug 31, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
5
Views
293
1996 - 2004 SN95 Mustang -General/Talk- Sep 1, 2026
AngryH58
A
B
Tire size question 1986 gt hatchback
  • B0udreaux
  • Jan 12, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
907
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 17, 2026
B0udreaux
B
Electrical Inaccessible starter solenoid from wire tuck, what are my options for an alternator upgrade?
  • AnthonyA1234
  • Jan 16, 2025
  • Fox 5.0 Mustang Tech
Replies
17
Views
1K
Fox 5.0 Mustang Tech Feb 8, 2025
Mindseye007
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
468
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?