Justin Smith
Minneapolis, MN
Polarbears22@gmail.com
(612)201-0693
Up for sale is a set of GT40P heads pulled from a 97' Ford Explorer. The truck had 12Xk miles on it, and everything appeared to be OE when pulled. The heads are P heads, as they have a special designed spark plug location. A couple of picture you can see there are 4 bars, which means P heads. $150 + shipping
The "GT40" explorer intakes, upper and lower from the 97'. The vehicle had external EGR, but had provisions for internal as well. I will give you the 19# that are in the intake. $125 + shipping
Here is another set of "GT40" intakes from a 01' Mountaineer. This intake had external EGR, but has no provisions for internal as it is blocked off. $125 + shipping and for a couple dollars the elbow and TB are yours.
Edelbrock Performer 289 intakes for a 4-barrel carb. $75 + shipping
I have these E7 heads just laying around, if you want them they are yours for $25, but shipping is about $75 to most of the U.S.
I have a set of hyperuetetic pistons from Keith Black. They are .030 over, and I no longer have a use for them anymore. Pretty sure they're 9.0:1. One of the pistons has a nick from an over rev, but shouldn't effect anything. They are attached to C8OE rods, or 68' rods.
Stock 77' FoMoCo Dizzy (Duraspark 2)
Crane XR-i installed in a 63' FoMoCo dizzy...
19# Injectors and MAFs... Tons of them $20 for 8 fuel injectors, $15 for MAF + shipping
Minneapolis, MN
Polarbears22@gmail.com
(612)201-0693
Up for sale is a set of GT40P heads pulled from a 97' Ford Explorer. The truck had 12Xk miles on it, and everything appeared to be OE when pulled. The heads are P heads, as they have a special designed spark plug location. A couple of picture you can see there are 4 bars, which means P heads. $150 + shipping
The "GT40" explorer intakes, upper and lower from the 97'. The vehicle had external EGR, but had provisions for internal as well. I will give you the 19# that are in the intake. $125 + shipping
Here is another set of "GT40" intakes from a 01' Mountaineer. This intake had external EGR, but has no provisions for internal as it is blocked off. $125 + shipping and for a couple dollars the elbow and TB are yours.
Edelbrock Performer 289 intakes for a 4-barrel carb. $75 + shipping
I have these E7 heads just laying around, if you want them they are yours for $25, but shipping is about $75 to most of the U.S.
I have a set of hyperuetetic pistons from Keith Black. They are .030 over, and I no longer have a use for them anymore. Pretty sure they're 9.0:1. One of the pistons has a nick from an over rev, but shouldn't effect anything. They are attached to C8OE rods, or 68' rods.
Stock 77' FoMoCo Dizzy (Duraspark 2)
Crane XR-i installed in a 63' FoMoCo dizzy...
19# Injectors and MAFs... Tons of them $20 for 8 fuel injectors, $15 for MAF + shipping