• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

gt40x heads

  • Thread starter Thread starter 310stanger
  • Start date Start date Aug 17, 2006
3

310stanger

New Member
Aug 15, 2006
170
1
0
Aug 17, 2006
#1
  • Aug 17, 2006
  • #1
a buddy i work with who also has a 90 5.0 lx hatch like me had a simple 302 stock short block with an ecam and gt40x heads. well he recently bought a dss 331 with cnc twisted wedges and when he pulled apart his old engine he found yet another bent pushrod. upon further investigation after tearing the heads apart he found the exhaust valve guides on nearly every cyl on one head were completely worn. the valve would shake back and forth excessively. the heads only had approx 60k miles if that. has anyone else ran into that? that seemed really premature to me. god i hope my trickflows dont do that. i dont wanna have to constantly pull this engine apart all the time.
 

Fett

New Member
Nov 2, 2004
766
6
0
Aug 17, 2006
#2
  • Aug 17, 2006
  • #2
A friend of mine has X heads and had problems with the valve guides. He bent two valves and there was a lot of scoring on the valve. It looked like something was inside the guide causing the problem...and that was with only a few thousand miles. He ended up having the valve guides replaced and a complete valve job done and the problem went away.....after tearing them apart twice because of two bent valves at two different times.
 
3

310stanger

New Member
Aug 15, 2006
170
1
0
Aug 17, 2006
#3
  • Aug 17, 2006
  • #3
im under the impression that for the most part the valvetrain components on most street oriented aluminum heads arent exactly the greatest.
 

2000xp8

SN Certified Technician
Aug 8, 2003
8,078
1,659
194
NJ
Aug 17, 2006
#4
  • Aug 17, 2006
  • #4
Fett said:
A friend of mine has X heads and had problems with the valve guides. He bent two valves and there was a lot of scoring on the valve. It looked like something was inside the guide causing the problem...and that was with only a few thousand miles. He ended up having the valve guides replaced and a complete valve job done and the problem went away.....after tearing them apart twice because of two bent valves at two different times.
Click to expand...
This is why my buddy who owns a mustang only shop, takes all heads to the machine shop, new or used, they still go for a valve job and spring seat pressure job.
He tells everyone to factor in at least $250 into their budget. Years ago (at least 10), he got tired of bad factory valve jobs causing problems. Even the better heads like afrs and TW's aren't immune to these problems.
 
R

rob1984

New Member
Aug 1, 2006
9
0
0
Aug 17, 2006
#5
  • Aug 17, 2006
  • #5
Iread in a ford performance book that it could be caused by incorrect pushrod length the rocker pushes over the end of the rod putting pressure on the guide.
 
You must log in or register to reply here.

Similar threads

Progress Thread H/C Swap Problems/Ideas
  • sav22rem22
  • Mar 31, 2024
  • Fox 5.0 Mustang Tech
Replies
10
Views
2K
Fox 5.0 Mustang Tech Sep 10, 2024
AeroCoupe
2
Bought an engine for my project
  • 2stroke1971
  • Jul 7, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
15
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 9, 2024
limp
Engine Rocker Noise after Aluminum heads and 1 piece CM Pushrods
  • 79pace
  • Apr 12, 2022
  • Fox 5.0 Mustang Tech
Replies
17
Views
4K
Fox 5.0 Mustang Tech Apr 19, 2022
Monkeybutt2000
M
Engine Pulling heads please help!
  • Diesel1277
  • Oct 15, 2019
  • Fox 5.0 Mustang Tech
Replies
5
Views
2K
Fox 5.0 Mustang Tech Oct 15, 2019
Diesel1277
L
Engine HEAD GASKET HELP !!
  • LouDegro3628
  • Feb 17, 2020
  • Fox 5.0 Mustang Tech
Replies
6
Views
3K
Fox 5.0 Mustang Tech Feb 28, 2020
HotFox
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?