Plenty of people have the 3D carbon wing with only the two holes with no problem. You can drill two more if you like, but it's definitely not needed. You will pay twice what Atlanta Mustang or the eBay guys charge to get a Ford factory one. Two screws and tape and you'll be fine. Some spoilers only use tape, so you'll be golden.
Did you install a GT500 wing from Atlanta Mustang and are you happy with it? I really do like the look of it I was just concerned about the long-term quality.
Apparently installing this spoiler makes you want to run down the strip!
I installed one last week early in the day at work… install was a breeze
–thanks kooldawg great write up and nice reference pics.
Call me crazy but I wanted to know just how well this tape would hold up without drilling the two outer holes on the deck lid and ran it through a touch less car wash that same night. It had been on the deck lid for close to 9 hours and my eyes were glued to it in the mirror while the blower dried the car. Also some 100mph+ runs this passed weekend and it is stuck solid all the way across.
Prep the deck lid well before installing and you will be fine.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?