Guesstimates on work needed?

1

1973mach1

Member

May 19, 2003

457

0

16

PA

Jul 20, 2004

#1

• Jul 20, 2004

• #1

Could anyone take a guess at what it will cost to have a tailight panel replaced, rear seat pans and floor pans installed and rear fender wells installed. I have the parts allready so i'd be paying for labor on them. IM just trying to get an idea of what I will be paying for rust repair after I finish the mechanical stuff.

Thanks,
Jim

 

R

Ronstang

New Member

Apr 4, 2004

1,294

0

0

Houston Texas

Jul 20, 2004

#2

• Jul 20, 2004

• #2

I do all my own body/sheetmetal work so guessing a price is rather hard but I would say tha is going to cost you at least $2K.

 

pabear89

Active Member

Apr 15, 2003

2,126

0

46

High in the Hills of So Ca with the Voices in My H

Jul 20, 2004

#3

• Jul 20, 2004

• #3

Add 50%.





PB

 

R

Ronstang

New Member

Apr 4, 2004

1,294

0

0

Houston Texas

Jul 20, 2004

#4

• Jul 20, 2004

• #4

pabear89 said:

Add 50%.PB

Click to expand...

That is why I said "at least".

 

pabear89

Active Member

Apr 15, 2003

2,126

0

46

High in the Hills of So Ca with the Voices in My H

Jul 20, 2004

#5

• Jul 20, 2004

• #5

Ronstang said:

That is why I said "at least".

Click to expand...

But You do your own work, And you Don't charge yourself for those unforseen little things.
You would have to admit that the amount of metal he wants replaced
is a good 1/4 of the car.
There is going to be some surprises pop up.

PB

 

R

Ronstang

New Member

Apr 4, 2004

1,294

0

0

Houston Texas

Jul 20, 2004

#6

• Jul 20, 2004

• #6

I have done enough of this work that unforseen things are already factored in when I start. I automatically assume the replacement panel will not fit properly since most available sheetmetal for these cars is pure crap and merely a "starting point" and will suffice but only with a lot of work and patience to make it right. I have already had to move body lines so I am aware of unforseen goblins rearing their ugly little heads. The back panel and floorpans he wants are actually pretty basic and easy but the wheelhouses are the ones that are going to be the real fun part of the job.

 

1

1973mach1

Member

May 19, 2003

457

0

16

PA

Jul 20, 2004

#7

• Jul 20, 2004

• #7

The rear fender wells are just rusted along the seam so looking in past the back tire I can inside the car were a weld use to be, its about a 6in by 2in strip of rust, im guessing it can be repaired without replacing the entire fender well? The rest of the fender well is in good shape since the undercoating held up well.

 

DarkBuddha

Founding Member

Dec 11, 2001

2,215

1

47

Seattle & Tampa

Jul 20, 2004

#8

• Jul 20, 2004

• #8

I've had simlar work done and the end cost was around $2500 including cost of parts when all was said and done. Full floors with front torquboxes was $1600. Rear wheel housings was $600. Taillight panel was $300. This was by a professional restoration shop who has a long history of high end restorations, but he did offer a nice "cash only discount" which probably saved me $500.