Guys with dumps

[Kornnut]

Have you got any pics of your setup? Going to order flow tubes tonight, and already have everything else. Wanna see everything before I go to welding.

 

[The Green GT]

I have dumped straight pipes. No pics but they just go straight off the h-pipe and turn down right before the rearend.

 

[ponyboy19]

I just ordered THESE and cut to length and welded..

 

[SeventyMach1]

If I had pics of it, I'd throw them up. I just had an exhaust shop "make" the turndown tips & weld them on. Flow tubes were given to me from a friend.

 

[Kornnut]

The flow tubes were for a fox but should be the same anyway. Lets hope it doesn't look like ass to much.

 

[gcomfx.com]

The flow tubes were for a fox but should be the same anyway. Lets hope it doesn't look like ass to much.

Hey.... some asses are nice to look at.

 

[SeventyMach1]

The flow tubes were for a fox but should be the same anyway. Lets hope it doesn't look like ass to much.

Should be just fine. Mine were from a Fox, too.

 

[Kornnut]

Should be just fine. Mine were from a Fox, too.

I just bought the $29 flow tech ones. I would have just used the stock stuff but its pretty rotten after 11 years of DD. Right now the car has hacked off mufflers with fence pipe welded in. http://store.summitracing.com/partdetail.asp?autofilter=1&part=BIG%2D53609FLT&N=700+0&autoview=sku

 

[RIO5.0]

I just got 4.00 turndowns and clamped em on...They slide onto either these stock muffs or my spintechs...Get ready for some rumble..
Long as your muufs have the stock brackets welded on its gravy..

I bought my spintechs with flows welded to em...direct fit.

 

[Kornnut]

Thanks thats what I was wanting to see. I am sure its going to be super loud. O/R h and slp lm1 resnators .





BTW your car is cleaner on the underside then my 02 gt is. Sad part its seen rain less then 10 times in its life. I gotta make it look like that this winter.

 

[Kornnut]

I say its going to be a tid bit loud

 

[kboy262]

I just got 4.00 turndowns and clamped em on...They slide onto either these stock muffs or my spintechs...Get ready for some rumble..
Long as your muufs have the stock brackets welded on its gravy..

I bought my spintechs with flows welded to em...direct fit.

Not to steal the thread but RIO where did you order your Spintechs from with the flo tubes already welded?

 

[SeventyMach1]

Kornnut, be sure to get some sound clips up once you get done!


I've considered the LM1's a few times. I just don't want it so loud that I'm getting pulled left & right.

 

[Kornnut]

Kornnut, be sure to get some sound clips up once you get done!


I've considered the LM1's a few times. I just don't want it so loud that I'm getting pulled left & right.

Here is my 02 with them and bassani x
http://videos.streetfire.net/search/stupid+mustang/0/ad93edf0-077a-4cd2-8d5f-6645e321555c.htm

I will get off my lazy ass and install them on the 95 this weekend.

 

[SeventyMach1]

4.6L + X-pipe + SLP's = Bad@$$ .....


But I've been wanting a good clip of a 5.0L, O/R H-pipe, & SLP's.

 

[Kornnut]

4.6L + X-pipe + SLP's = Bad@$$ .....


But I've been wanting a good clip of a 5.0L, O/R H-pipe, & SLP's.

The Hitman on here has that with bbk headers. Bad ass sounding.

 

[95mustang_gt]

Here is my spintech set up.But its not as nice as rio.

Here is video with a mac hpipe
View attachment 427684

 

[RIO5.0]

Not to steal the thread but RIO where did you order your Spintechs from with the flo tubes already welded?

I got em from a place named Midwest speed or something?? Was 3 yrs ago or so....I'm not using them anymore....If if somethings you might be interested in shoot me a pm...They still looks just like the pics above...
Mine are the Sportsman series...tad quieter them Prostreets..

 

[Kornnut]

http://videos.streetfire.net/video/9921091a-aa0a-437a-a3bd-987000070d3f.htm


Not a good vid but you get the idea. I like how it sounds