guys with side exit help me with install...

98blackstallion · May 4, 2005

guys with borla side exit exhuast help me with install...

ok i traded a guy for his borla side exit exhaust kit without the skirts. My question is is how do you mount the mount that is placed right before the exhuast tips? DO i have to drill any holes or anything?Please help me guys cause I dont have a clue on where to mount the hanger by the tips...if someone can help it will be appreciated...

98blackstallion · May 4, 2005

RoadracerGT · May 4, 2005

There should be a large hole near the tip or where the E-brake cable is. I had a little hanger with my SpinTech kit that allowed me to slip a LARGE washer and nut in that hole, and let me thread a bolt into. The bolt holding the exhaust hanger up, and the hanger using a rubber mount holding the tip about a fingers width below the OE rocker panel.

Hell, if that won't work, just have the exhaust shop fab up something and weld it on. No biggie.

tarch · May 4, 2005

yeah it's mostly a up to you thing when it comes to installation...

the roush is a pretty straight forward install... they come with these brackets you bolt onto the body

guys with side exit help me with install...

98blackstallion

Member

98blackstallion

Member

RoadracerGT

tarch

My 8V > 4V > 2V

Similar threads

guys with side exit help me with install...

98blackstallion

Member

98blackstallion

Member

RoadracerGT

tarch

My 8V > 4V > 2V

Similar threads

Privacy & Transparency

Privacy & Transparency