H Pipe headeaches

Well I was ordering some other stuff from Jegs so went ahead and got my O/R H pipe and MIL Eliminators there too since its $8.95 to get it all to my door in 2 days. Went through half a can of PB Blaster and got the od cat H pipe out. The passenger front O2 sensor wuz a pain to unplug. Well I had to grind some weol out of the O2 sensor hole on the new H pipe, and noticed the front O2 sensors are mounted on the other side of the pipes on my O/R H pipe. Got it all bolted in and I swear the new H pipe is an inch or two shorter, so it was a bit of a challenge getting my cat back bolted up. Went to plug in front O2 sensors and the wires dont reach. Called Jegs and they tell me I need to order the BBK extensions with their O/R pipe. How come nobody told me when I ordered this stuff? crapola Well I didnt want to screw anything up and wasnt sure if it used special high heat wires so I ordered the extensions. Waited a couple days... and am good. No leaks. Just have a smelly cloud of smoke from all the PB Blaster cooking off. I thought this was an easy job that could be done in a couple hours or less??
Sounds great, didnt know it would be THAT LOUD!!! Its awesome with Flows Super 40's!! Now I just need to get that IAC mod to drop the RPM's faster. Sorry for the ranting and raving....

Looking at the product it was "cheaper." Had to clean out ALOT of metal filings/shavings. I paid less, and had to do more work. It does the job but I would recomend staying away from it, just go Mac or BBk etc. amnit:

Ya I know. And I usually do pay a li'l more for a quality product... But it works, and when I fired 'er up n drove around town I was stoked.

Well whatever the reason for my problems with the Jegs O/R H pipe its on and working fine now. Tomorow I'll be doing a bit more driving in it. Probably 45 mnutes to an hour straight for work. Hopefully I wont go def from my new LOUD exhaust.

Cant wait to do the IAC fix now. Hopefully it will be done this weekend.