• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Hardest Hit: UCA or LCA?

  • Thread starter Thread starter goodfastncheap
  • Start date Start date Dec 13, 2007

goodfastncheap

Member
Dec 25, 2006
100
0
17
Bellevue, NE
Dec 13, 2007
#1
  • Dec 13, 2007
  • #1
Let's say just for the sake of discussion that I just have budget for one set of torque boxes - which ones should go in first, upper or lower? Both have been seam welded already and were in great shape to start with.

Also, Delrin, poly or spherical bushings on the chassis side on BOTH upper and lower, or one or the other?

'88 coupe, track only, about 3,000 lbs., no more than 375 Ft./Lb., footbrake stall, 3500 stall converter, 3.55 gear, 9" slicks, 10pt. with welded, through the floor subfame connectors.

Opinions?
 

samickguy15

Member
Sep 1, 2005
404
0
16
Delavan, IL
Dec 13, 2007
#2
  • Dec 13, 2007
  • #2
For a track only car - Spherical all around.

On a budget? Uppers first. If you think about it, that's where your big pulling forces around going to come from. As the wheels rotate forward, the axle wants to rotate up/back. Your lower boxes won't see near as much stress as the uppers.
 

Darkwriter77

Resident Ranting Negative Nancy
5 Year Member
Jul 1, 2005
315
283
134
Apache Junction, AZ
Dec 13, 2007
#3
  • Dec 13, 2007
  • #3
Eh ... I'd say the lowers. The lower torque boxes seem to be the first ones to rip under stress, from what I've seen. On a budget, I'd get some decent LCA's and some poly bushings for your uppers.
 

Blk91stang

Member
Jan 3, 2003
607
0
16
North Brunswick, NJ
Dec 13, 2007
#4
  • Dec 13, 2007
  • #4
Um, your torque boxes will be fine. Pretty sure you will NEVER have them tear or crack or anything. You have many things on your side. 3:55 gears, automatic, foot stalling.

My 85' has a 351w with 4.10's, slicks, 3,500 stall, foot brake, 150 shot of nitrous. Has gone a best of 1.50 60'. Torque boxes have never been touched and have MANY runs on it!!!

I would save your money but if you wanna be safe, do both and get them both out of the way. No clue as which bushings to go with as I have a car with Full Poly and another with Spherical on the body side/Poly on rear, and both hook up awesome.
 

NKau

Founding Member
Dec 15, 2001
1,346
0
37
Jefferson, WI
Dec 14, 2007
#5
  • Dec 14, 2007
  • #5
Having an automatic helps a lot, but if you run this thing at a track a lot/do a lot of burnouts with slicks, you'll want the lower tq box reinforcements. Never heard of uppers ripping out.......lowers are a common problem, even on abused cars that have been run on street tires their whole lives. Also, installing the torque box reinforcements is a lot easier than repairing ripped torque boxes, trust me.
 

SVT32VDOHC

waiting for the next hack atta
Founding Member
Nov 22, 2001
3,501
28
119
Motor City
Dec 14, 2007
#6
  • Dec 14, 2007
  • #6
NKau said:
Also, installing the torque box reinforcements is a lot easier than repairing ripped torque boxes, trust me.
Click to expand...


Sounds like you've been there done that...uh??
 

goodfastncheap

Member
Dec 25, 2006
100
0
17
Bellevue, NE
Dec 14, 2007
#7
  • Dec 14, 2007
  • #7
Sounds like the consensus is LCA's/lower torque boxes...

I am going to box my stock LCA's with 11 ga. and make my own lower TB reinforcements, also with 11 ga. bolted and welded.

Leaning toward spherical bushings on the chassis side, poly on the axle side top and bottom.
 

NKau

Founding Member
Dec 15, 2001
1,346
0
37
Jefferson, WI
Dec 14, 2007
#8
  • Dec 14, 2007
  • #8
SVT32VDOHC said:
Sounds like you've been there done that...uh??
Click to expand...


Ohhhhhh yeah......
 
You must log in or register to reply here.

Similar threads

  • Locked
“Doing stuff the wrong way for the right reasons”: A related stupid story.
  • CarMichael Angelo
  • Apr 26, 2020
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
5K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 27, 2020
a91what
Cams! (valve event timing, resonance tuning, what's theory, what's fact)
  • FastDriver
  • Oct 27, 2011
  • Fox 5.0 Mustang Tech
Replies
15
Views
6K
Fox 5.0 Mustang Tech Nov 27, 2011
NIKwoaC
L
  • Locked
94 GT, Boss331, T-56, IRS
  • laserfiveohhh
  • Jun 4, 2011
  • SN95 Mustangs For Sale (1994-04)
Replies
1
Views
4K
SN95 Mustangs For Sale (1994-04) Jun 14, 2011
laserfiveohhh
L
S
  • Locked
FS: HBH's 2003 Sonic Blue Cobra, 10K miles, 700+ HP, FULLY BUILT FRONT TO BACK!
  • sjstang
  • Dec 13, 2009
  • SN95 Mustangs For Sale (1994-04)
Replies
4
Views
13K
SN95 Mustangs For Sale (1994-04) Dec 29, 2009
sjstang
S
T
LCA theory
  • Torinalth
  • Jul 7, 2006
  • SN95 4.6L Mustang Tech
Replies
6
Views
1K
SN95 4.6L Mustang Tech Jul 11, 2006
propellerhead
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?