hey guys i just recently rebuilt my 302 i fired it up on saturday ran for a minute or two and killed it i was goin to put in my trans and stuff like that in but had to stop short due to easter anyways i filled it up with coolant and all other fluids and noticed a small drip from under the car thought maybe heater core lines it wasnt them i got under and started looking around noticed it was from the head but i know i torqued them down in proper sequence so i checked the lower intake that was also tight i started asking around and thought maybe the gaskets was wrong like it came from a fox body or sumthing like that but the head gaskets are the same im goin to pull the heads back off and replace the gaskets i jsut want to know if i should replace the head bolts as well thankx for all the help