• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Header to H-Pipe leak??????????

  • Thread starter Thread starter AnthonyR23
  • Start date Start date Apr 17, 2007

AnthonyR23

Member
Sep 8, 2006
661
0
16
Ontario
Apr 17, 2007
#1
  • Apr 17, 2007
  • #1
Hi, I replaced my old headers for new bbk equal length headers... because I think I had a exhaust leak... which I did in the old headers... but now the ticking sound is still there but just not as loud... I heard a crack when bolting up the old stock h-pipe.. my question is... would a leak at the flange of the old h-pipe to headers... cause a loud tick/squeek..... under load... or is it far enough away from the engine that it shouldn't make that noise??? Any ideas??
 

blackened88lx

Active Member
Aug 9, 2006
0
4
28
Connecticut
Apr 17, 2007
#2
  • Apr 17, 2007
  • #2
You will definitely hear a leak from there. Loosen the bolts, move things around a bit and retighten them, tight. Might wanna look around and see if there's a broken weld or something though if you heard a crack.
 

AnthonyR23

Member
Sep 8, 2006
661
0
16
Ontario
Apr 17, 2007
#3
  • Apr 17, 2007
  • #3
the cracking sound was more of a popping kinda loud click when I was tightening up the old h pipe.. think it may have just slipped into place... it is just such a pain in the a**... to get up there.. This ticking has been going on for a long time.. but just got louder with time.. the new headers has made it a bit quieter... but I think I could have a problem with the throw out bearing on the clutch... not sure exactly... If it was a exhaust leak... wouldn't it be happening all the time... not just under load.. ??? or I guess the rocking of the engine could make the collector move... where it attaches to the h-pipe.. Seems like the throw out bearing click is hard to find exactly.. kinda nervous putting it up on jacks and running the rear wheels to get it to make that noise.. When I put a crow bar up to the valve covers and can hear a ticking.. but that ticking happens all the time... it's a different noise I think.... more of a squeeking... Is some ticking normal under the valve covers???
 

AnthonyR23

Member
Sep 8, 2006
661
0
16
Ontario
Apr 17, 2007
#4
  • Apr 17, 2007
  • #4
My dad just got a compression tester at a garage sale.. If all the cylinders are within 10 percent of each other... wouldn't that indicate that everything is pretty much ok with my engine...
 

Roland69

Sergeant Tangnet
Sep 17, 2005
2,867
3
58
Port Elgin, Ontario
Apr 17, 2007
#5
  • Apr 17, 2007
  • #5
did you use some hi-temp silicone on your flange..
 

AnthonyR23

Member
Sep 8, 2006
661
0
16
Ontario
Apr 18, 2007
#6
  • Apr 18, 2007
  • #6
No I didn't use any high temp silicon.... is that neccessary... I wish there was a way I could tell that ... that is making the noise... before doing anything major.. I am considering purchasing a mac pro chamber but have read on some people's posts that they will actually make the noise louder...
 

Dan95-5.0

Active Member
Jun 14, 2003
1,110
0
36
Manitoba, Canada
Apr 18, 2007
#7
  • Apr 18, 2007
  • #7
i have a leak at the same spot. i had a custom h-pipe made a few years ago. it had a very small leak then. after i installed some mac unequals, the leak got worse. i could not stop the leak because of the way they built the h-pipe. now i'm buying a x-pipe.

to check, start the car when its cold and put your hand around the ball and socket flange. dont actually touch it, just over it. you will feel the air blowing out.
 
You must log in or register to reply here.

Similar threads

D
Exhaust Difficulty of fixing exhaust leak at manifold
  • dqureshi06
  • Aug 27, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
352
Fox 5.0 Mustang Tech Aug 28, 2026
General karthief
R
bbk shorty header to mid pipe gasket
  • randyyy
  • Sep 29, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
4
Views
508
1996 - 2004 SN95 Mustang -General/Talk- Sep 29, 2025
randyyy
R
M
Engine Unexplainable Exhaust Pop and Gurgle
  • Mrnissen122
  • Feb 14, 2026
  • Fox 5.0 Mustang Tech
Replies
12
Views
861
Fox 5.0 Mustang Tech Feb 18, 2026
Noobz347
S
Fox Another try for the European guy to get his first Fox
  • Schargedfox
  • Aug 3, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
10
Views
399
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 4, 2026
DadLife0724
Engine New Oil Leak Help.
  • Slo5Oh89
  • Mar 14, 2025
  • Fox 5.0 Mustang Tech
Replies
8
Views
741
Fox 5.0 Mustang Tech Mar 19, 2025
Slo5Oh89
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?