Hi, I'm just installing the 50 resto 6pc clear headlight kit, and was wondering if you need to put anything on the rubber seal on the main headlight to hold it down/secure it?...I really don't want any moisture getting into these at all!...thanx
The 4 little clips that hold the hold the rubber seal down should be good enough.
It had been my experience that any non-Ford headlamps will require a re-seal. Easy to do with clear silicone before you put them on. That is unless you enjoy taking them back off 3 weeks later! Both sets of non-Ford headlamps I have installed leaked but were resealed with no further problems since resealing. One set were the "DiamondCuts" and the other set were "offshore" stock replacements.