3 332stang New Member Aug 14, 2011 27 0 0 Aug 16, 2011 #1 Aug 16, 2011 #1 i have edlebrock heads on the way and i wondering would i have to fly cut the pistons and what pistons should i use
i have edlebrock heads on the way and i wondering would i have to fly cut the pistons and what pistons should i use
R reldla1996 Member May 4, 2011 356 22 19 Dayton, Ohio Aug 18, 2011 #2 Aug 18, 2011 #2 It depends on which valve sizes you have and what cam you have, but in the end, the only way to be sure is to check piston to valve clearance, often done with clay. You could try calling the Edelbrock tech line and see what they tell you.
It depends on which valve sizes you have and what cam you have, but in the end, the only way to be sure is to check piston to valve clearance, often done with clay. You could try calling the Edelbrock tech line and see what they tell you.
Rick 91GT Mustang Master Nov 29, 1999 9,692 95 99 PA Aug 20, 2011 #3 Aug 20, 2011 #3 What Edelbrock head did you buy? What year is the shortblock? What cam are you using? What rocker?