• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Heater blower not working...

  • Thread starter Thread starter ImportSlayer347
  • Start date Start date Oct 19, 2008

ImportSlayer347

Member
Oct 13, 2008
173
1
19
Sarasota, FL
Oct 19, 2008
#1
  • Oct 19, 2008
  • #1
This car has been nothing but problems. Now my heater blower quit working.

I have heat coming out but the fan won't come on. I checked the fuse and it is good. Any ideas? A wiring diagram would help for testing too. (I know you are reading this Saleen).
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Oct 19, 2008
#2
  • Oct 19, 2008
  • #2
Saleen0679 will indeed have some great advice.

I would check for power into the blower motor. If you do not have it, check its circuit protection (fuse 9 IIRC).

Good luck.
 

Saleen0679

10 Year Member
Apr 14, 2005
876
24
49
Yakima, WA
Oct 19, 2008
#3
  • Oct 19, 2008
  • #3
Possible ignition switch failing. Sometimes you can get the blower back on by jiggling the key. Usually other accessories are affected also, but not always. Visually check for ignition switch separation problems.

Ignition switch R&R info should it come to that.

Replace a 1979-1993 Ignition Switch Assembly

Circuit Diagram:

 
Last edited: Feb 10, 2018

warriorpluto

Member
Aug 1, 2007
267
1
19
monroe.LA
Oct 19, 2008
#4
  • Oct 19, 2008
  • #4
ImportSlayer347 said:
This car has been nothing but problems. Now my heater blower quit working.

I have heat coming out but the fan won't come on. I checked the fuse and it is good. Any ideas? A wiring diagram would help for testing too. (I know you are reading this Saleen).
Click to expand...

(try having no heat at all) i know how you feel but the best thing to do is just have patience and take your time. when i first got my 87 the car kept eating up starters even with a brand new flywheel. so i switched to a mini starer. havent had a problem since. take out every problem one at a time........
 

ImportSlayer347

Member
Oct 13, 2008
173
1
19
Sarasota, FL
Oct 19, 2008
#5
  • Oct 19, 2008
  • #5
I didn't have heat either until last week when I replaced the heater core. As far as one thing at a time...

I replaced the entire clutch kit/cable/flywheel and rebuilt the tranny...

Then the new clutch cable seized up and I found the pedal was worn...

Then the computer crapped out...

Then I replaced the heater core...

Then the fusible link fried and killed the whole car...

Then the headlights wouldn't work (loose connection on ignition)...

Then the MF switch on the column went bad killing my wipers...

Now this...

And all this in two months!!!
 

warriorpluto

Member
Aug 1, 2007
267
1
19
monroe.LA
Oct 19, 2008
#6
  • Oct 19, 2008
  • #6
damn. thats alot in two months. more problems than me. i havent even tried to replace the heater core yet. was it a long job? cause its starting to get cold down here now. and im going to replace the fusible link just to get it out of the way. where is that thing anyway?
 

ImportSlayer347

Member
Oct 13, 2008
173
1
19
Sarasota, FL
Oct 20, 2008
#7
  • Oct 20, 2008
  • #7
Heater core = BIG BALLZ!!

I used this...

Ford Mustang Heater Core Replacement - Mustang Monthly
 
B

blown90notch

New Member
Oct 16, 2008
14
0
0
Oct 20, 2008
#8
  • Oct 20, 2008
  • #8
changing heater cores in foxes are pretty easy,of course i have done about 6 of them in different cars so it may be easy to me.i have gotten it down to about 3 hours start to finish.as far as heater not working,did you plug the blower motor resister back in?you can also lift the flap on the passenger side of the heater box and stick a screwdriver in and spin the squirl cage and see if it is stuck..other than that all you can do it test for power.
mark
 

ImportSlayer347

Member
Oct 13, 2008
173
1
19
Sarasota, FL
Oct 20, 2008
#9
  • Oct 20, 2008
  • #9
I ran 12 vdc to the motor and it fired right up. There is also power at the fuse. So wouldn't that mean that the heater control switch is messed up?
 

ImportSlayer347

Member
Oct 13, 2008
173
1
19
Sarasota, FL
Oct 20, 2008
#10
  • Oct 20, 2008
  • #10
It was the heater control switch (sorta). I pulled the control switch out and the harness clip on the back was loose. Another no cost fix.

Thanks Saleen for the diagram.
 

warriorpluto

Member
Aug 1, 2007
267
1
19
monroe.LA
Oct 20, 2008
#11
  • Oct 20, 2008
  • #11
ImportSlayer347 said:
Heater core = BIG BALLZ!!

I used this...

Ford Mustang Heater Core Replacement - Mustang Monthly
Click to expand...


thanks alot man! ive been looking for something like this. i guess ill give it a shot tomorrow morning.
 

ImportSlayer347

Member
Oct 13, 2008
173
1
19
Sarasota, FL
Oct 20, 2008
#12
  • Oct 20, 2008
  • #12
It really helps to have a friend that knows their way around a tool box to help.
 
You must log in or register to reply here.

Similar threads

D
Electrical Weird door wiring issues
  • Dakar09
  • Oct 20, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
203
Fox 5.0 Mustang Tech Oct 21, 2026
Dakar09
D
A
P0036 P0056 P0137 P0157 2020 Ford Mustang GT
  • AmkoA
  • Jun 16, 2026
  • 2024+ (S650) Mustang -General/Talk
Replies
0
Views
287
2024+ (S650) Mustang -General/Talk Jun 16, 2026
AmkoA
A
G
Resolved Smoking Wiring Issue After GT40 Head Swap
  • Grapes
  • Aug 15, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
582
Fox 5.0 Mustang Tech Aug 22, 2026
Grapes
G
G
2000 GT- Alternator not charging
  • grugug
  • Tuesday at 8:30 PM
  • SN95 4.6L Mustang Tech
Replies
10
Views
103
SN95 4.6L Mustang Tech Thursday at 9:04 AM
squeak93
M
1996 GT Speedometer electrical nightmare
  • moon96gt
  • Oct 7, 2026
  • SN95 4.6L Mustang Tech
Replies
2
Views
177
SN95 4.6L Mustang Tech Oct 17, 2026
CAMTWO1070
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?