Heater blower not working...

This car has been nothing but problems. Now my heater blower quit working. :nonono:

I have heat coming out but the fan won't come on. I checked the fuse and it is good. Any ideas? A wiring diagram would help for testing too. (I know you are reading this Saleen).:hail2:
 
Saleen0679 will indeed have some great advice. :hail2:

I would check for power into the blower motor. If you do not have it, check its circuit protection (fuse 9 IIRC).

Good luck.
 
Possible ignition switch failing. Sometimes you can get the blower back on by jiggling the key. Usually other accessories are affected also, but not always. Visually check for ignition switch separation problems.

Ignition switch R&R info should it come to that.

Replace a 1979-1993 Ignition Switch Assembly

Circuit Diagram:

Heater_Blower_Ckt.webp
 
Last edited:
This car has been nothing but problems. Now my heater blower quit working. :nonono:

I have heat coming out but the fan won't come on. I checked the fuse and it is good. Any ideas? A wiring diagram would help for testing too. (I know you are reading this Saleen).:hail2:

(try having no heat at all) i know how you feel but the best thing to do is just have patience and take your time. when i first got my 87 the car kept eating up starters even with a brand new flywheel. so i switched to a mini starer. havent had a problem since. take out every problem one at a time........
 
I didn't have heat either until last week when I replaced the heater core. As far as one thing at a time...

I replaced the entire clutch kit/cable/flywheel and rebuilt the tranny...

Then the new clutch cable seized up and I found the pedal was worn...

Then the computer crapped out...

Then I replaced the heater core...

Then the fusible link fried and killed the whole car...

Then the headlights wouldn't work (loose connection on ignition)...

Then the MF switch on the column went bad killing my wipers...

Now this...

And all this in two months!!!:shrug:
 
damn. thats alot in two months. more problems than me. i havent even tried to replace the heater core yet. was it a long job? cause its starting to get cold down here now. and im going to replace the fusible link just to get it out of the way. where is that thing anyway?
 
changing heater cores in foxes are pretty easy,of course i have done about 6 of them in different cars so it may be easy to me.i have gotten it down to about 3 hours start to finish.as far as heater not working,did you plug the blower motor resister back in?you can also lift the flap on the passenger side of the heater box and stick a screwdriver in and spin the squirl cage and see if it is stuck..other than that all you can do it test for power.
mark