I agree, The sensors may not be the same, But the housing will accept either one. I was just posting this up in case others wanted a more "oem" solution. A single piece verses piece together.
I agree, The sensors may not be the same, But the housing will accept either one. I was just posting this up in case others wanted a more "oem" solution. A single piece verses piece together.
3ft 5/8ID
3ft 3/4ID
3/8 brass T fitting
2x 2 inch 3/8 brass fitting
1 90 deg 1/2 inch 1 side threaded
1x 1 1/2 inch thread pipe to side the hose over for the 90 deg. elbow
2x 1 inch hose clamps
I left everything on i just needed to pop the fuel rail on the pass side and slid everything underneath. No more leak, still using stock sensor
From a tuning point of view having the sensor after the heater core will read a little lower temp wise, which isnt the end of the world, but i might drop my fan settings in the summer. For now hotter the better in the winter