Helicopter steering wheel!! Help

blandq · May 30, 2009

Completely replaced all but the steering pump and the gear box; new valve, allthe steering arms, bushings, cyl....everything. Filled with ATF, started the car and it all seemed fine for a moment. Then you turn the steering wheel and it, by itself starts rocking back and forth very, very rapidly..if Id had my hands inside the wheel it would have taken them off!!!

Is it an adjustment???

other_shoe · May 30, 2009

You have the lines from valve to cylinder crossed/switched.

Someone else can probably give a better explanation, but as I recall: Once you turn the wheel off center, the non-hydraulic force on the centerlink starts it headed in one direction but the hydraulic assist is actually trying to push it in the opposite direction. Then the various mechanisms that are supposed to recenter everything cause the cycle with the wheel whipping back and forth. Freaked the heck out of me when I did it years ago. And, yeah, you could break a bone or two.

68stang351 · May 30, 2009

LOL! Take a vid, I want to see!!

jcode68 · May 30, 2009

Yup, your hoses are crossed. Ask me how I know

2+2GT · May 30, 2009

jcode68 said:
Yup, your hoses are crossed. Ask me how I know

Been there, done that. Swap the hoses at one end and all will be well.

Helicopter steering wheel!! Help

blandq

other_shoe

Member

68stang351

jcode68

Active Member

2+2GT

Similar threads

Helicopter steering wheel!! Help

blandq

other_shoe

Member

68stang351

jcode68

Active Member

2+2GT

Similar threads

Privacy & Transparency

Privacy & Transparency