Hello!!!

TURBINE · Jun 27, 2018

New to Stang net but not new to mustangs.
I have a calypso green 92 lx with a 306,
custom grind comp hydraulic roller,
extensively ported Brodix st 5.0 r heads,
victor E.F.I. Intake,
80 lb Siemens injectors and a vortech v2 si
on e85.
I put it all together and ordered a PiMPxs from Shannon over at stinger.
So far I have it up and running and have the idle dialed in pretty good.

95BlueStallion · Jun 27, 2018

Pictures or you arent real!

TURBINE · Jun 27, 2018

It’s a fun junk build.

TURBINE · Jun 27, 2018

TURBINE · Jun 27, 2018

Yeppp

a91what · Jun 27, 2018

hows it going. We have a complete digital tuning portion of this forum and many MS/ PIMP users on this site so if you have any questions or need some advice start a thread in the digital tuning forum and we can give you some good advice.

TURBINE · Jun 27, 2018

Thanks man! Im sure I’ll be needing it

95BlueStallion · Jun 27, 2018

Looks like a fun car to me. Welcome to the site.

Steel1 · Jun 27, 2018

Yep, the digital tuning section is very helpful.
I installed a PimpXS recently and have gotten plenty of help on here and Stingers forum as well.
Welcome and good luck!

TURBINE · Jun 27, 2018

I believe I’ve been reading one of your threads over on stingers forum steel. USE A STOCK DISTRIBUTOR

a91what · Jun 27, 2018

100,000,000,000% yes

Steel1 · Jun 27, 2018

TURBINE said:
I believe I’ve been reading one of your threads over on stingers forum steel. USE A STOCK DISTRIBUTOR

Yeah, stock distributor or aftermarket with Ford electronics and shutter wheel.
I'm still trying to iron out a little cold start idle hunting but overall I've been really happy with the PimpXS

TURBINE · Jun 27, 2018

I started mine with an msd pro billet. I planned on getting a stock one and found out I had 3 in my parts shed (semi trailer) at my old shop.
I’ve yanked one apart and checked it out and cleaned it.
Plan on stabbing it in this weekend while finishing up the wiring re-do

a91what · Jun 27, 2018

Steel1 said:
Yeah, stock distributor or aftermarket with Ford electronics and shutter wheel.
I'm still trying to iron out a little cold start idle hunting but overall I've been really happy with the PimpXS

Not to derail but...

Are you using warm idle ve table? This keeps ve table 1 idle fuel tunable when cold and the idle ve table takes care of hot idle.
On cold idle you are not using the closed loop idle timing table. It's running on ign table 1 until the car reaches (140* default temp setting) get the idle timing in the ign table at cold idle smooth so the timing is not hunting around.

I can expand on this in your tuning thread if needed.

Steel1 · Jun 29, 2018

a91what said:
Not to derail but...

Are you using warm idle ve table? This keeps ve table 1 idle fuel tunable when cold and the idle ve table takes care of hot idle.
On cold idle you are not using the closed loop idle timing table. It's running on ign table 1 until the car reaches (140* default temp setting) get the idle timing in the ign table at cold idle smooth so the timing is not hunting around.

I can expand on this in your tuning thread if needed.

Ok, I'm a little confused but will have to find some time to look into what your saying.
I think the PimpXS tables may be set-up a little differently but I'm starting to get
better at navigating them.
Minor issue for now but it will get worked out, thanks for the advise and I'll let
you know.

a91what · Jun 29, 2018

Steel1 said:
Ok, I'm a little confused but will have to find some time to look into what your saying.
I think the PimpXS tables may be set-up a little differently but I'm starting to get
better at navigating them.
Minor issue for now but it will get worked out, thanks for the advise and I'll let
you know.

the pimpxs is essentially an MS3, i tuned a turbo fox a few weeks ago running one of these systems and it turned out very well using the method mentioned above. If you want i can screenshot the tables and such in your tuning thread so you know where and what i am referring to.

Noobz347 · Jun 29, 2018

Steel1 said:
Yep, the digital tuning section is very helpful.

Damn, I'm good.

a91what said:
Not to derail but...

Are you using warm idle ve table? This keeps ve table 1 idle fuel tunable when cold and the idle ve table takes care of hot idle.
On cold idle you are not using the closed loop idle timing table. It's running on ign table 1 until the car reaches (140* default temp setting) get the idle timing in the ign table at cold idle smooth so the timing is not hunting around.

I can expand on this in your tuning thread if needed.

This guy is ok too.

Steel1 · Jun 29, 2018

a91what said:
the pimpxs is essentially an MS3, i tuned a turbo fox a few weeks ago running one of these systems and it turned out very well using the method mentioned above. If you want i can screenshot the tables and such in your tuning thread so you know where and what i am referring to.

That would be great, thanks

Hello!!!

TURBINE

Member

95BlueStallion

My assy trans to myself

TURBINE

Member

TURBINE

Member

TURBINE

Member

Attachments

a91what

SendMeUrDataLog

TURBINE

Member

95BlueStallion

My assy trans to myself

Steel1

Mustang Master

TURBINE

Member

a91what

SendMeUrDataLog

Steel1

Mustang Master

TURBINE

Member

a91what

SendMeUrDataLog

Steel1

Mustang Master

a91what

SendMeUrDataLog

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor

Steel1

Mustang Master

Similar threads

Hello!!!

Member

My assy trans to myself

Member

Member

Member

Attachments

SendMeUrDataLog

Member

My assy trans to myself

Mustang Master

Member

SendMeUrDataLog

Mustang Master

Member

SendMeUrDataLog

Mustang Master

SendMeUrDataLog

Stangnet Facilities Maint Tech... Er... Janitor

Mustang Master

Similar threads

Privacy & Transparency

Privacy & Transparency