Help! Does anybody know what this is?

F

forfamily

New Member

Jun 18, 2006

25

0

0

St. Charles, MO

Aug 27, 2006

#1

• Aug 27, 2006

• #1

I went to move our 68 Coupe in the garage and found this laying on the floor, would have been from drivers side, I think up in the area of the engine compartment. Does anybody know what this is? I have no clue

It looks like a shim of some sort, the edges are clean, so it doesn't look like it broke off from anything. Last time we drove it there were no problems.

If it stops raining we will take it out for a test drive.

Thanks.

 

Attachments

• DSC01133.webp

  7.8 KB · Views: 185

mfp4073

Founding Member

Mar 14, 2001

387

0

38

Hells Ditch, FL

Aug 27, 2006

#2

• Aug 27, 2006

• #2

I have had my 67 torn apart many times and dont know that I have ever seen anything that looks like that.

 

krash kendall

Active Member

Nov 19, 2004

1,258

0

36

Aldergrove, B.C. Canada

Aug 27, 2006

#3

• Aug 27, 2006

• #3

I think it looks sort of like some of that shim material you sometimes see between leaf springs.

 

chillininnh

New Member

Apr 3, 2006

28

0

2

NH

Aug 27, 2006

#4

• Aug 27, 2006

• #4

If it's like a foam material, it probably came from the cowl. When I removed the cowl panel in my 69 there was a similar piece pressed on to the inner cowl to support the outer. Typically there is one on each side, I found the missing one down in the driver side of the cowl at the bottom, clogging up my cowl drain. Yours may have fallen out on its own somehow.

 

F

forfamily

New Member

Jun 18, 2006

25

0

0

St. Charles, MO

Aug 27, 2006

#5

• Aug 27, 2006

• #5

chillininnh said:

If it's like a foam material, it probably came from the cowl. When I removed the cowl panel in my 69 there was a similar piece pressed on to the inner cowl to support the outer. Typically there is one on each side, I found the missing one down in the driver side of the cowl at the bottom, clogging up my cowl drain. Yours may have fallen out on its own somehow.

Click to expand...

 

F

forfamily

New Member

Jun 18, 2006

25

0

0

St. Charles, MO

Aug 27, 2006

#6

• Aug 27, 2006

• #6

chillininnh said:

If it's like a foam material, it probably came from the cowl. When I removed the cowl panel in my 69 there was a similar piece pressed on to the inner cowl to support the outer. Typically there is one on each side, I found the missing one down in the driver side of the cowl at the bottom, clogging up my cowl drain. Yours may have fallen out on its own somehow.

Click to expand...

It is steel. About 1/8 inch thick.
Finding parts on the floor is one thing, but then when you can't identify them is even worse!

 

chillininnh

New Member

Apr 3, 2006

28

0

2

NH

Aug 27, 2006

#7

• Aug 27, 2006

• #7

I agree, that sucks.

 

Jester67

Member

Sep 21, 2004

908

1

18

TN

Aug 27, 2006

#8

• Aug 27, 2006

• #8

I have been alover my car and have not seen anything like that. Sorry

 

D

D.Hearne

New Member

Sep 29, 2000

11,730

6

0

south louisiana

Aug 27, 2006

#9

• Aug 27, 2006

• #9

1/8" thick, U shaped, would be an alignment shim.

 

LUCAFU1

Founding Member

Apr 19, 2001

496

0

16

Tucson

Aug 27, 2006

#10

• Aug 27, 2006

• #10

dude its extra weight. throw it in the scrap metal pile =)

 

F

forfamily

New Member

Jun 18, 2006

25

0

0

St. Charles, MO

Aug 27, 2006

#11

• Aug 27, 2006

• #11

OK - I'll stop worrying about it!