Im not sure what i should be looking for.
Last night when i started the car up, i heard an imidiate ticking from the driver side valve cover. I got onto it, going wot, and i had a HUGE loss of power compared to what i normally have. The ticking is similar to the sound of an exhaust leak, only MUCH louder; however, the sound itself is not as continuous as an exhaust leak, but still a constant loud ticking.
My friend thinks its a pushrod or a rocker arm. I took the valve cover off, and the rocker arms all seem about the same, not much lash, all on their fairly tight. Do you think i should check the pushrods next? I am not sure if there is a torque specification to putting the rocker arms back on.
Next step is to do a compression check unforunetly. If that comes up bad, going for the 331.
Last night when i started the car up, i heard an imidiate ticking from the driver side valve cover. I got onto it, going wot, and i had a HUGE loss of power compared to what i normally have. The ticking is similar to the sound of an exhaust leak, only MUCH louder; however, the sound itself is not as continuous as an exhaust leak, but still a constant loud ticking.
My friend thinks its a pushrod or a rocker arm. I took the valve cover off, and the rocker arms all seem about the same, not much lash, all on their fairly tight. Do you think i should check the pushrods next? I am not sure if there is a torque specification to putting the rocker arms back on.
Next step is to do a compression check unforunetly. If that comes up bad, going for the 331.