Help ID wires and blinker problem

P

ponyracer1

New Member

Mar 16, 2009

14

0

0

Crestview Fl (for now)

Apr 25, 2009

#1

• Apr 25, 2009

• #1

Hey all, need your help!! I just finished an aod to TKO swap and now my blinkers won't work. Researched all the common probs, flashers are good, wires are tight in the back of the flasher switch, ign switch seems good, blower motor works, etc. Not sure if it's something as simple as an unhooked wire, these have "appeared" hanging under the dash and for the life of me I can't find where they go. Any ideas??

 

P

ponyracer1

New Member

Mar 16, 2009

14

0

0

Crestview Fl (for now)

Apr 25, 2009

#2

• Apr 25, 2009

• #2

Sorry, 92 GT!! Both sets of wires seem to go up into the factory harness that runs across the dash. There is also one more funny looking plug hanging up near the firewall, you can see it in a couple of the pics, has strange looking "shark fin" retainers on it.

 

Saleen0679

10 Year Member

Apr 14, 2005

876

24

49

Yakima, WA

Apr 25, 2009

#3

• Apr 25, 2009

• #3

White - rear window defrost control relay
Black - looks like the connector for the shift lock actuator (push brake pedal before shifting into gear) used in the auto.

None of these should affect blinkers. Checked fuses? Make sure you check the correct flasher (not the one in the fuse box).

Can't see the little gray connector well enough to ID.

 

P

ponyracer1

New Member

Mar 16, 2009

14

0

0

Crestview Fl (for now)

Apr 25, 2009

#4

• Apr 25, 2009

• #4

HUH so none are needed now...hmm thanks for the info!! Ya checked all the usual suspects as far as the blinkers, no joy yet. Strange, they worked 3 days ago perfectly, pull the column for the pedal swap and voila no blinkers.

 

P

ponyracer1

New Member

Mar 16, 2009

14

0

0

Crestview Fl (for now)

Apr 25, 2009

#5

• Apr 25, 2009

• #5

Any idea why the black colored one AND the white one would have a purple/orange wire to it? According to this diagram it's the on the #5 fused blinker circuit? I also pulled apart the flasher assembly, the purple/orange wire also shows up in the lower (smaller) plug. Pulled apart the switch and there's no contacts in it?? It's empty!! Strange??

 

Saleen0679

10 Year Member

Apr 14, 2005

876

24

49

Yakima, WA

Apr 25, 2009

#6

• Apr 25, 2009

• #6

There are P/O wires all throughout the vehicle not all of them are for the blinker circuit. The flasher has a two position connector with P/O & LB wires going to it.