• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

**HELP**Ignition and door locks

  • Thread starter Thread starter 1995 GT
  • Start date Start date Oct 8, 2009
1

1995 GT

New Member
Oct 8, 2009
17
0
0
New Briatain, PA
Oct 8, 2009
#1
  • Oct 8, 2009
  • #1
missing original keys for my 1995 mustang. Was wondering if any one knows if the ignition lock and door cylinder locks will work from a 96-98 GT to a 1995 mustang. They are alittle different looking on the ignition and i think it went from 8 cut to 10 cut keys for 95 to 96. But if im swapping all will they fit the doors and in the steering collum? Found a set on ebay OEM and brand new. Also does a 95 Gt have a ignition key and door and truck keys or does one work all?
 

Chythar

Recently finished repairing my rear
20+ Year Stangneter
Aug 26, 2004
2,373
140
113
Foothill Ranch, CA
Oct 8, 2009
#2
  • Oct 8, 2009
  • #2
Door cylinder locks will work 94-04, I believe. The ignition lock may not work if the key has a chip in it (PATS system). Ford switched to the PATS system for Mustangs in 96, so make sure the auction you buy does NOT have PATS.

You can also have all your locks keyed to the same key, but a locksmith will charge you per lock to re-key them.

I haven't bought any of my Mustangs new, so I can't tell you what Ford did. But all my Mustangs have had the same key for the ignition and all locks. If yours does not use the same key, you can have your key cut to match all locks. In most cases, the ignition only uses the first 4 "cuts", and the locks use the rest. Best bet would be, bring your keys to a locksmith. They may be able to cut you a single key for all locks.
 
1

1995 GT

New Member
Oct 8, 2009
17
0
0
New Briatain, PA
Oct 8, 2009
#3
  • Oct 8, 2009
  • #3
Thanks for the info. The acution says it none pats system so i guess we will see.

thanks chris
 
You must log in or register to reply here.

Similar threads

S
01 GT DRIVERS SIDE DOOR LOCK CYLINDER LINKAGE
  • Scwhitten
  • May 13, 2026
  • SN95 4.6L Mustang Tech
Replies
3
Views
96
SN95 4.6L Mustang Tech Friday at 8:15 PM
melo.timo
M
N
Power door lock motor Question
  • NYFox
  • Mar 15, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
207
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 17, 2026
NYFox
N
J
89 mustang alarm install to lock and unlock
  • jk66
  • Apr 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
130
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 10, 2026
jk66
J
1
1989 gt both doors wont lock or unlock help.
  • 1989 mustang gt
  • Nov 29, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
501
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Dec 22, 2025
manicmechanic007
C
Electrical HELP! 1989 5.0 Stick, Voltage Bleed onto Ignition Trigger wire
  • ChickenDeluxe
  • May 14, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
159
Fox 5.0 Mustang Tech May 24, 2026
ChickenDeluxe
C
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?