• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Help Keep Blowing #6

  • Thread starter Thread starter Cmoney
  • Start date Start date Apr 11, 2006
C

Cmoney

New Member
Apr 13, 2004
10
0
2
Apr 11, 2006
#1
  • Apr 11, 2006
  • #1
When I turn on my a/c I blow fuse #6. I have looked for obvious shorts and everything looks good.
1992 LX 5.0
Can someone please point me in a direction to start looking?
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Apr 12, 2006
#2
  • Apr 12, 2006
  • #2
How does the wiring under the hood for the A/C clutch look? I would check it at the LPS and at the WOT relay, and then at the clutch itself.

The wiring at the LPS and WOT relay really vulcanizes - you might find the issue there.

Good luck.
 
C

Cmoney

New Member
Apr 13, 2004
10
0
2
Apr 12, 2006
#3
  • Apr 12, 2006
  • #3
I checked the lPS, the WOT, and compressor wiring, but didn't find anything that looked out of place(even untaped them a ways back).
Could the compressor be drawing to much?
Are there any other tests I could do besides ripping my whole car apart, which is probably my next approach?
 
Z

ZephyrMotorspor

New Member
Jan 8, 2006
88
0
0
Tampa, Fl
Apr 12, 2006
#4
  • Apr 12, 2006
  • #4
try putting larger amp fuses in there until you get to a point where it doesn't blow.
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Apr 12, 2006
#5
  • Apr 12, 2006
  • #5
ZephyrMotorspor said:
try putting larger amp fuses in there until you get to a point where it doesn't blow.
Click to expand...
Do you hate this guy or have something against him? That's about the worst advice you could give. Maybe he will send you the repair bill for the fire caused by the oversize fuses you recommeded.
 
C

Cmoney

New Member
Apr 13, 2004
10
0
2
Apr 12, 2006
#6
  • Apr 12, 2006
  • #6
I found the problem, it was the compressor harness with the diode on it. All the wires looked fine, but it has a short in it somewhere. I bought one at the junk yard put the car back together and all was well.


Thanks for the help except ZephyrMotorspor
C
 
You must log in or register to reply here.

Similar threads

B
Electrical Why does my fox body keep frying eecs
  • brandyn200
  • Jun 20, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
529
Fox 5.0 Mustang Tech Jun 25, 2026
AeroCoupe
Electrical Lincoln Mark VIII Replacement Fan Motor
  • AeroCoupe
  • Sep 26, 2026
  • Fox 5.0 Mustang Tech
Replies
2
Views
173
Fox 5.0 Mustang Tech Sep 26, 2026
AeroCoupe
G
Resolved Smoking Wiring Issue After GT40 Head Swap
  • Grapes
  • Aug 15, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
601
Fox 5.0 Mustang Tech Aug 22, 2026
Grapes
G
L
Engine Why won't the motor start if I have spark and fuel
  • LeviAnderson
  • Nov 20, 2025
  • Fox 5.0 Mustang Tech
Replies
3
Views
567
Fox 5.0 Mustang Tech Nov 20, 2025
AeroCoupe
N
Engine 86 GT no start/stall
  • nweber
  • Jul 28, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
279
Fox 5.0 Mustang Tech Jul 29, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?