My friend's 5.0 is covered w/snow and ice right now, so it'll be a min before I can ****** one of his. Can anyone tell me the specifics on these bolts? Length, pitch, size. Thanks, Steve.
GOOD IDEA! And when I find them (or get some new ones) i'll put some on them. I was just going to put on some underdrives, and then thought I should replace my thermostat and clean the housing also. Between me, my 11 year old, and two buddies somebody moved or pocketed the bolts and now I can't find them. But never the less I'm ready w/that Loc Tite. Thanks, bud.
I think they are 5/16 bolts some are fine thread some are course. Go to hard ware store and buy 4 of each. The length depends on if you have elec fan clutch fan or flex fan
I think they are 5/16 bolts some are fine thread some are course. Go to hard ware store and buy 4 of each. The length depends on if you have elec fan clutch fan or flex fan
Thanks. I was thinking that they were metric, like 12 or 13mm. Or maybe 1/2 inch. I'm pretty sure mine are coarse thread. got a two hour window between getting off and hardware store closing, and it's starting to sleet again. This is going to be ugly!
Yeah, that's exactly what has happened. Gett'n older so memory's going. Don't remember what I did with them, and them had kids and friends in the garage also, so who knows where they've gone to. I think I've got a solution.
Step 1 - Go to (insert local parts store name here), and buy waterpump.
Step 2 - Take waterpump to hardware store, get bolts using new pump.
Step 3 - Return new waterpump to (local parts store).