Help me decide on suspension/rear end...

You should also weld the axle tubes. I would look at some of the Maximum Motorsports box sets if I were you. This way you can get a whole matched set of stuff and I think there is a price break for buying it all in their box.

Lower control arms

The maximum grip box is about $4500:

The Maximum Grip Box
NOW AVAILABLE! The MM Maximum Grip Box is quiet and composed enough for a street car, yet fast enough to win at the track. This box includes the following parts. Items different from the Road & Track Box are italicized.

# MM Strut Tower Brace*
# MM K-Member
# MM Front Control Arms w/ urethane bushings
# MM Front Coil-Over Conversion Kit
# MM Adjustable Tie-Rod Ends
# MM Standard Torque-arm
# MM K-Member Brace
# Solid steering shaft
# MM Full Length Subframe Connectors
# MM Aluminum rack bushings
# MM Panhard Bar with Aluminum rod
# MM Adjustable Rear Swaybar
# MM Caster/Camber Plates*
# MM Rear Lower Control Arms without spring perch or swaybar mount
# Hypercoil Coil-Over Springs
# MM Rear Coil-Over Conversion Kit
# Bilstein HD struts & shocks
# Urethane swaybar bushings
# Urethane swaybar endlinks

Also, with that suspension set up and the power you have you will need a built rear end.

exindust said:

Lower control arms

Click to expand...

:Word: get these before you do the K-member or any front suspension mods.

Defiantly check out MM. http://www.maximummotorsports.com/. They should have mostly everything that you will need. Prices aren't too bad and there great products. For suspension there probally one of the best companies.