Help me with a diagnosis

Your car is doing exactly what mine is doing. The squealing is the throwout bearing; which you can simply slide under the car and spray with grease for the time being. I am going to replace my entire clutch as soon as I can. Working 12 hours a day kinda sucks.

I would have to say throw out bearing also, if not that, then the input shaft bearing/bushing.

Not very helpful, but interesting nonetheless...

NAPA actually gave me an 80% plastic throw-out bearing when I replaced my clutch and the throw-out bearing in the kit was wrong... the only part that was metal was the face that contacted the pressure plate fingers and a metal ring right behind it... the rest (including everything touching the shaft and the arm) was plastic.

When I blew my clutch I immediately thought that was the problem, but when I got under there the thing was fine! I still replaced it, but I also talked to a few guys and they said it should be fine to use.

Anyone else have a plastic throw-out bearing? Considering the OEM is all metal and costs the same damn $40 the plastic one costs.