Help my Identify these heads?

im not 100% on this but i think those are the old trick flows. the very first designs to come out.

I thought the old trickflow highports were cast iron

stykthyn said:

I thought the old trickflow highports were cast iron

Click to expand...

they are and had some other name on them not trick flow.

I'm gonna go out on a limb and say you've got bigger problems than figuring out which heads you've got. Although, they do look like a nice set of aftermarket aluminums. I believe that the valve sizing matches trickflows. I know that they came with 2.02 intake valves. 1.62 sounds off, but 1.60 would be right, if I'm not mistaken. The shape of the intake ports.... I can't remember how rounded off the old TFS heads were, but if you find out that they are the old trick flows, I would recommend havings someone smart look at the valve guides. I remember reading about all kinds of problems about the originals' valve guides.

Just a couple of thoughts. Wish I could answer your question.

Chris

Those look similar to my old high ports, but it is hard to tell form the picture quality. Can you take a pict of the front, where it should have the stamping. The old high ports are aluminum, but are rough cast, not smooth. I should be able to tell front the front pict.

Also the high ports were the 2.02 and 1.60.

Just FYI, it took me 3 months of calling and research before I found out what mine were. Most of the people that work at Trickflow where not there when they first made the High Ports, so they still could be. Later today I will pull you some picts of mine to compare.