• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Help! Need a quick answer

  • Thread starter Thread starter damystikal69
  • Start date Start date Apr 18, 2006
D

damystikal69

New Member
Apr 29, 2005
86
0
0
Wilmington, Oh
Apr 18, 2006
#1
  • Apr 18, 2006
  • #1
Heres my problem. I recently built a 331 stroker. My transmission is Tremec 3550. I just bought a Ram Billet Steel 28oz flywheel. My clutch is a King cobra. Heres the problem. Today is the first day I have test drove this car. I never had a problem with this transmission and the clutch has plenty of meat left. "Well it did". When you take off it feels fine in first but once you shift to second black smoke rolls up in the car and you can smell nothing but clutch. This was a clean install. Does anyone know what could be causing this. I used the stock pressure plate bolts from the stock flywheel. I was told this was the problem. can anybody verify this?
Thanks Dave
 

50gt1988

New Member
Dec 25, 2004
154
0
0
Spanaway, WA
Apr 18, 2006
#2
  • Apr 18, 2006
  • #2
re-adjust clutch, if that doesn't work replace clutch
 
D

damystikal69

New Member
Apr 29, 2005
86
0
0
Wilmington, Oh
Apr 19, 2006
#3
  • Apr 19, 2006
  • #3
I loosend the cable up a little because there was no play in the pedal, it was stiff. After I adjusted it I couldn't put it gear, it was too loose. So I tightned the cable up. It smokes once I give it hell. After I get passed first, thats when it starts. Is this because The flywheel is new and needs broke in or is something inside screwed. I was told something about metric bolts verses standard bolts. I used the stock pressure plate bolts from the stock flywheel on the RAM Flywheel. I was told the the stock flywheel is metric and the RAM is standard threads. But if this was the case i cant see the bolts even threading in. They said they would, but back out. Is this possible. But I've only driven 10 miles and cant see the bolts backing out in 10 miles. Any suggestions?
 
D

damystikal69

New Member
Apr 29, 2005
86
0
0
Wilmington, Oh
Apr 19, 2006
#4
  • Apr 19, 2006
  • #4
Any one?
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
Apr 19, 2006
#5
  • Apr 19, 2006
  • #5
umm well i'm not sure if this is your problem but if you have a 5.0L H.O block you need a 50 oz flywheel and harmonic balancer. the 28 oz is a 351w piece.
 
D

damystikal69

New Member
Apr 29, 2005
86
0
0
Wilmington, Oh
Apr 19, 2006
#6
  • Apr 19, 2006
  • #6
I've got a 331 from DSS Racing. It's balanced at 28oz. So I had to get a flywheel and harmonic balancer balanced at 28oz.
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
Apr 19, 2006
#7
  • Apr 19, 2006
  • #7
well that makes sense then.
 

Bad92GT

The 5 Minute Plan Man
Jun 10, 2004
492
0
0
SC
Apr 19, 2006
#8
  • Apr 19, 2006
  • #8
clutch isnt engaging fully.. im not sure of why or how but somethings amiss in the engaging of the clutch.. best off pulling the tranny off along with the clutch.. check it out
 

352Ford2

New Member
Oct 12, 2005
393
0
0
Seattle,WA
Apr 19, 2006
#9
  • Apr 19, 2006
  • #9
I have had a simular thing happen right after I put a clutch in and it was the pressure plate bolts backed out. Luckaly that car had a lower bellhousing I could remove, inspect, and tighten them easyily to fix it.

did you have your flywheel resurfaced?
 
You must log in or register to reply here.

Similar threads

T
Drivetrain TREMEC TKX 1–2 Grinding Issue at ~4,000 Miles + Poor Warranty/Customer Service Experience
  • Ttopfoxguy
  • Oct 10, 2026
  • Fox 5.0 Mustang Tech
Replies
5
Views
336
Fox 5.0 Mustang Tech Oct 15, 2026
JMG9350
J
N
Vibration after new clutch
  • nipple_looker
  • Sep 20, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
23
Views
743
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 26, 2026
fasterthangas
F
S
Car shakes when taking off help???
  • STANKYstangs
  • May 10, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
12
Views
563
1996 - 2004 SN95 Mustang -General/Talk- May 27, 2026
LILCBRA
Drivetrain 83’ Glx convertible C5 Trans help!
  • JacksonJared2113
  • Dec 25, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
542
Fox 5.0 Mustang Tech Dec 26, 2025
JacksonJared2113
K
TKX Transmission Shifting Problem
  • KWC156
  • Jun 23, 2025
  • Other Auto Tech
  • 2
Replies
21
Views
3K
Other Auto Tech Jun 13, 2026
427nostang
4
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?