• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

HELP NEED HELP !!!

  • Thread starter Thread starter gcwh02
  • Start date Start date May 30, 2007

gcwh02

New Member
Jun 20, 2005
515
0
0
pottstown, PA
May 30, 2007
#1
  • May 30, 2007
  • #1
I just got all excited at got my car up and running. I went to take it around the block and give it a good romp... Oil spewed everywhere, all i did was drive it for 1 minute and pulled it back into the garage. Smoke was everywhere, I turned it off and checked the oil and nothing came up on my dipstick. When I popped my hood my dipstick was loose and off the header bolt so I am thinking it came from the bottom of the dipstick?? What I need to know is, do you think there is any hardcore damage done to my engine???
 
S

Sicarius428

Active Member
Jan 6, 2004
2,085
5
49
May 30, 2007
#2
  • May 30, 2007
  • #2
You will never know untill you take it apart. Hopefully it didn't run dry. Fill it up and see how it does. Only way to know without taking it apart. Do you have an Oil Pressure gauge? Might want to install one and keep an eye on it.
Kevin
 

gcwh02

New Member
Jun 20, 2005
515
0
0
pottstown, PA
May 30, 2007
#3
  • May 30, 2007
  • #3
Sicarius428 said:
You will never know untill you take it apart. Hopefully it didn't run dry. Fill it up and see how it does. Only way to know without taking it apart. Do you have an Oil Pressure gauge? Might want to install one and keep an eye on it.
Kevin
Click to expand...
I hope I didnt run it dry either.. Tomorrow I am going to get oil and see how much it takes to fill it. I have an autometer oil press. gauge so I will check it out tomorrow. Just say I did run it pretty well to dry, do you think 20 second would of hurt?
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
May 30, 2007
#4
  • May 30, 2007
  • #4
If your dipstick was unseated, it won't register when you check the level.

If it was me, I'd reinstall the dipstick tube. Then drain the oil (do this all without running the car) and measure how much comes out. Now you'll have a decent idea of how low it really was.

FWIW, one drop of oil on a hot exhaust makes a surprising amount of smoke.

Good luck.
 
You must log in or register to reply here.

Similar threads

A
Resolved 302 oil leak when running
  • AlexM556
  • Sep 8, 2026
  • Classic Mustang Specific Tech
  • 2
Replies
36
Views
1K
Classic Mustang Specific Tech Nov 1, 2026
manicmechanic007
Engine Coolant boiling in hose?
  • Teen'93stang5.0
  • Jun 3, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
352
Fox 5.0 Mustang Tech Jun 8, 2026
Mustang5L5
T
Oil burning on my recently buil 302
  • The blk67
  • May 15, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
250
Fox 5.0 Mustang Tech May 15, 2026
Noobz347
H
97 cobra maf sensor help
  • Hopper1979
  • Oct 16, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
4
Views
168
1996 - 2004 SN95 Mustang -General/Talk- Oct 17, 2026
CAMTWO1070
L
Car has been overheating. Not sure what is causing it. Any help would be appreciated.
  • Luckysgirl
  • Jun 2, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
2
Views
258
1996 - 2004 SN95 Mustang -General/Talk- Jun 2, 2026
Luckysgirl
L
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?