• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Help needed on check engine light codes

  • Thread starter Thread starter ThePope
  • Start date Start date Jun 25, 2007
T

ThePope

New Member
Nov 3, 2006
25
0
2
Huntington, NY
Jun 25, 2007
#1
  • Jun 25, 2007
  • #1
For the past week I been getting check engine codes. P0420, P0430 and P1000 I did some research and found out what they are and what not. My car currently has a BBK off road H Pipe and flowmaster catback. I also purchased a diablosport predator. I have the car tuned to my likings with the rear o2s shut off. Is there something I can do so these codes don't keep comming on? I tryed looking here and on sn95forums but I wasn't able to find anything. If anyone can help, I thank you.
 

goshia

New Member
Jul 1, 2005
252
0
0
Mead, Colorado
Jun 25, 2007
#2
  • Jun 25, 2007
  • #2
The P1000 will clear on its own once the car has logged a few hours of operation after changing a part and disconnecting the battery.
 
C

chuck943

New Member
Oct 26, 2002
262
0
0
north carolina
Jun 25, 2007
#3
  • Jun 25, 2007
  • #3
P0420 and P0430 is catalyst system efficiency codes. I would think that if you have the rear O2's shut off it would not set these codes. Does your diablo let you turn off the catalyst monitor?
P1000 is the monitors have not set yet however they won't set untill the other 2 are cleared and do not come back.
 
T

ThePope

New Member
Nov 3, 2006
25
0
2
Huntington, NY
Jun 25, 2007
#4
  • Jun 25, 2007
  • #4
chuck943 said:
P0420 and P0430 is catalyst system efficiency codes. I would think that if you have the rear O2's shut off it would not set these codes. Does your diablo let you turn off the catalyst monitor?
P1000 is the monitors have not set yet however they won't set untill the other 2 are cleared and do not come back.
Click to expand...

I hooked up the diablo again and I check the setting. I think I had the rear still on for some reason but I thought I shut them off. So I went through all the settings and made sure everthing was right. So tomorrow when I go to work, ill see what happens.
 
T

ThePope

New Member
Nov 3, 2006
25
0
2
Huntington, NY
Jun 27, 2007
#5
  • Jun 27, 2007
  • #5
Just wanted to let everyone know the problem as been fixed. I think on the tuner I didnt shut of the MIL. No engine codes now.
 

Mike97gt

it doe snot
Founding Member
Jan 26, 1999
10,633
7
89
the people's republic of massachusetts
Jun 27, 2007
#6
  • Jun 27, 2007
  • #6
sounds good!
 
You must log in or register to reply here.

Similar threads

C
Need MIL Eliminators?
  • crazyone64
  • May 18, 2026
  • SN95 4.6L Mustang Tech
Replies
3
Views
170
SN95 4.6L Mustang Tech May 21, 2026
GOvert
G
T
Looking for some help with 2006
  • thedudeillest
  • Mar 16, 2026
  • 2005 - 2014 S-197 Mustang -General/Talk-
Replies
14
Views
481
2005 - 2014 S-197 Mustang -General/Talk- Mar 20, 2026
Noobz347
A
Check Engine codes jumping around
  • azactor
  • Jan 9, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
190
1996 - 2004 SN95 Mustang -General/Talk- Jan 10, 2026
gkomo
P
2000 GT Random Power Loss
  • Pinellas50
  • Mar 9, 2026
  • SN95 4.6L Mustang Tech
Replies
4
Views
313
SN95 4.6L Mustang Tech Mar 23, 2026
Pinellas50
P
L
95 gt engine vibration
  • lenzgt
  • May 11, 2026
  • 1994 - 1995 Specific Tech
Replies
6
Views
222
1994 - 1995 Specific Tech May 26, 2026
lenzgt
L
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?