• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

HELP PLEASE...306 backfiring

  • Thread starter Thread starter 1982matthew
  • Start date Start date Mar 17, 2008
1

1982matthew

New Member
Mar 14, 2008
42
0
0
Easton,Pa
Mar 17, 2008
#1
  • Mar 17, 2008
  • #1
I have posted this in the tech part and didn't get any response.

My friend put a 306 into a 1993 mustang and it only has about 5 miles on it because it seems to be backfiring through intake manifold. He put the motor in like 4 years ago an switched the valve springs. he needs cash an wants to sell it to me, so before I jump into this and might be spending more money in parts than the car is worth, does anyone have an idea what this might be. It is running an starts right up an it seems as though all the power is there, someone said it might be a bent valve but wouldn't that affect the performance of it? It seems as though the 4 valve is staying open when it shouldn't.

Anybody who has any idea at all please let me know, I can get this car at a good price since it isn't running correctly and want to buy it if I can fix it cheap enough

Also, does anyone know anybody in the Easton/ Allentown are of Pa that specializes in mustangs or in fact Ford motors that could help me?
 

BlownFiveLiter

have car, will race....wait, it doesn't run
15 Year Member
Nov 29, 1999
3,133
18
108
Chicagoland
Mar 17, 2008
#2
  • Mar 17, 2008
  • #2
Probably a stupid question, but what's the base timing set at? Should be 10° BTDC with the spout plug removed. You can go as high as 14-18° but you may run into detonation issues the higher you set it.
 
1

1982matthew

New Member
Mar 14, 2008
42
0
0
Easton,Pa
Mar 17, 2008
#3
  • Mar 17, 2008
  • #3
At this point no question is a stupid question, I'm sure he checked the timing but I will make sure to ask him tonight.. thanks
 

BlownFiveLiter

have car, will race....wait, it doesn't run
15 Year Member
Nov 29, 1999
3,133
18
108
Chicagoland
Mar 17, 2008
#4
  • Mar 17, 2008
  • #4
Also make sure it doesn't have any vacuum leaks or codes while you're at it. Intake gaskets love to move when you're putting the lower on, if you didn't use studs in each corner to guide it down.
 
D

DrMaxit

Founding Member
Nov 4, 2002
139
0
16
Augsta GA
Mar 17, 2008
#5
  • Mar 17, 2008
  • #5
StangGT1995 said:
Also make sure it doesn't have any vacuum leaks or codes while you're at it. Intake gaskets love to move when you're putting the lower on, if you didn't use studs in each corner to guide it down.
Click to expand...


Nailed it I think, saying the timing is right, which you, too, have already addressed, I guess I'm just a bit late! hah!

Let us know what you find, but hell, if you fix it for him, he might not want to sell it to you, id buy an engine that was backfiring if all the junk in there was new just to tear it down and re-do it, also how was the cam timed? Did he make any adjustments to it? ect so on.

--Chuck
 
1

1982matthew

New Member
Mar 14, 2008
42
0
0
Easton,Pa
Mar 17, 2008
#6
  • Mar 17, 2008
  • #6
what do you mean by "cam timed" and i am gonna check the timing. i am not fixing it for him i am gonna buy it if I can fix it easy/cheap. I was just looking into it before I make any quick decisions and spend all kinds of monies.
 
5

57fairlane

New Member
Apr 2, 2005
560
0
0
Oakwood, GA
Mar 18, 2008
#7
  • Mar 18, 2008
  • #7
1982matthew said:
what do you mean by "cam timed" and i am gonna check the timing. i am not fixing it for him i am gonna buy it if I can fix it easy/cheap. I was just looking into it before I make any quick decisions and spend all kinds of monies.
Click to expand...

Setting the valve timing events relative to the crank with the timing chain
 
You must log in or register to reply here.

Similar threads

S
Best place to source power steering parts for a '67? (control valve, ram, hoses)
  • SophiaTatum
  • Jun 15, 2026
  • Classic Mustang Specific Tech
Replies
2
Views
222
Classic Mustang Specific Tech Jun 18, 2026
SophiaTatum
S
D
Mustang not starting
  • Dawry Ramos
  • Sep 12, 2026
  • 2015 - 2023 Specific Tech
Replies
10
Views
406
2015 - 2023 Specific Tech Oct 3, 2026
Dawry Ramos
D
New Exhaust for 408w stroker
  • SadbutTrue
  • Sep 10, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
1
Views
166
1965 - 1973 Classic Mustangs -General/Talk- Sep 10, 2026
nickyb
L
Help with 1986 GT 5 Speed Please
  • Lcasada1999
  • Mar 20, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
391
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 21, 2026
CAMTWO1070
H
Ongoing Battle With Hydraulic Lifters
  • hailer06
  • Jun 8, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
614
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 9, 2026
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?