This being on my 92.I installed the Eibach pro kit springs & dampers on the front end quite awhile back.The car is far from driveable.I used stock strut tower mounts & bushings with the dampers.I heard from a few of you back then that it would work fine.
Well something doesn't work.That nut on the center of the strut clamshell doesn't screw down that far.So being that the threads dont stick out the top part of the nut.It hits the spacer that fits inside the bushing after a few turns.Am I making any sence to you?
I'm also having another problem which may or may not be related to this.After installing both the springs and struts,there's a problem with the sway bar end links.I'll jack the control arm up,mount the links into the arm,then onto the sway bar.The real problem,letting the control arm down more than a quarter and it starts pulling so hard on the sway bar links.I have to stop..it WILL either shred them or bust the sway bar mounts.
So I tried this with the extra long stock end links....even with the stock sway bar...STILL THE SAME THING.Its like the control arms go down a lot more than normal.
What's going on here? I totally stopped working on this car for nearly 10 months.I just need a 100% "for sure" answer so I can finish this thing and get it back on the road.
Well something doesn't work.That nut on the center of the strut clamshell doesn't screw down that far.So being that the threads dont stick out the top part of the nut.It hits the spacer that fits inside the bushing after a few turns.Am I making any sence to you?
I'm also having another problem which may or may not be related to this.After installing both the springs and struts,there's a problem with the sway bar end links.I'll jack the control arm up,mount the links into the arm,then onto the sway bar.The real problem,letting the control arm down more than a quarter and it starts pulling so hard on the sway bar links.I have to stop..it WILL either shred them or bust the sway bar mounts.
So I tried this with the extra long stock end links....even with the stock sway bar...STILL THE SAME THING.Its like the control arms go down a lot more than normal.
What's going on here? I totally stopped working on this car for nearly 10 months.I just need a 100% "for sure" answer so I can finish this thing and get it back on the road.