• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Help with backfire

  • Thread starter Thread starter Roland69
  • Start date Start date Feb 7, 2006

Roland69

Sergeant Tangnet
Sep 17, 2005
2,867
3
58
Port Elgin, Ontario
Feb 7, 2006
#1
  • Feb 7, 2006
  • #1
It dosen't happen all the time only once in a while. Sometimes when I get the revs up to about 4500+ and go to change into 2nd or 3rd I let of the gas and not right away but it gives a nice big BOOM out the exhaust inbetween the shift. Any ideas anybody.
 

Roland69

Sergeant Tangnet
Sep 17, 2005
2,867
3
58
Port Elgin, Ontario
Feb 7, 2006
#2
  • Feb 7, 2006
  • #2
oh and I tried a search but didn't see a thread like this.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Feb 7, 2006
#3
  • Feb 7, 2006
  • #3
If you are giving it decent gas and then clutch/let off the gas immediately in order to shift, it creates a an interesting dynamic (revs are up and throttle is now closed, ergo manifold vac goes through the roof, etc) and one can create a backfire during this dynamic. The computer has a strategy to deal with this situation, but mods, exhaust, state of tune, etc might be off a little.

Retrieving the codes is the place to start.

Good luck.
 

Roland69

Sergeant Tangnet
Sep 17, 2005
2,867
3
58
Port Elgin, Ontario
Feb 7, 2006
#4
  • Feb 7, 2006
  • #4
some how I new you would have an answer Thanks Hissin. Should I try letting off the gas a bit slower when shifting would that help. It only does it once in a while.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Feb 7, 2006
#5
  • Feb 7, 2006
  • #5
You shouldnt have to do anything special while shifting. If I had to guess, I would say it is some of the mixture making it into the exhaust before igniting. Do you have any sort of miss that you know of?
The only "Fix it" kind of thing I know of is to make sure the IAC is clean and functional, since it is used during this time (since the throttle blade is closed, the IAC opens to keep some air moving to prevent stalling, etc).

I am sure Joe, Tom, et al will have ideas. Good luck.

BTW, in your sig, I think you meant to write "loser," which is spelled with one O. I dont normally point out grammar stuff because I type fast and make typos, but since it is in your sig......
 

Roland69

Sergeant Tangnet
Sep 17, 2005
2,867
3
58
Port Elgin, Ontario
Feb 8, 2006
#6
  • Feb 8, 2006
  • #6
Thanks for pointing that out FIXED. Would it make a diff because my car is S/D.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Feb 8, 2006
#7
  • Feb 8, 2006
  • #7
Shouldnt matter being SD that I know of (my fox is SD still), esp given that you are pretty stock.

Bump.
 

Roland69

Sergeant Tangnet
Sep 17, 2005
2,867
3
58
Port Elgin, Ontario
Feb 8, 2006
#8
  • Feb 8, 2006
  • #8
so the IAC would cause that. I've never cleaned it so I should do so any way. Do I just use brake clean.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Feb 8, 2006
#9
  • Feb 8, 2006
  • #9
Roland69 said:
so the IAC would cause that. I've never cleaned it so I should do so any way. Do I just use brake clean.
Click to expand...
I would say it could help, if the car is in good tune, no codes, no misses, etc.

Here is some info on cleaning the IAC.

Good luck.
 

Shakerhood

20+ Year Stangneter
Oct 28, 2004
3,361
211
114
Ohio
Feb 8, 2006
#10
  • Feb 8, 2006
  • #10
If your Timing is off, it could cause the Afterfire that you speak of.
 

Roland69

Sergeant Tangnet
Sep 17, 2005
2,867
3
58
Port Elgin, Ontario
Feb 8, 2006
#11
  • Feb 8, 2006
  • #11
I think the timming is still at the stock setting and the dizzy is stock. I am going to check the timming and adjust to 13-14 deg
 

Zero_chance

Founding Member
May 29, 2001
1,244
7
59
Maricopa, AZ
Feb 8, 2006
#12
  • Feb 8, 2006
  • #12
Could just be unburned fuel igniting in the exhaust. At that RPM, the valves are really working.
 

FORCED2DV8

New Member
Jun 6, 2005
458
0
0
Grand Rapids MI
Feb 8, 2006
#13
  • Feb 8, 2006
  • #13
It could be timing, how many miles on your engine, timing chain & gears, or a overly rich mixture, your engine is flowing alot of fuel revving 45oo rpm's and then drops significantly when the throttle shuts, Check your A/F and timing.
 

Roland69

Sergeant Tangnet
Sep 17, 2005
2,867
3
58
Port Elgin, Ontario
Feb 8, 2006
#14
  • Feb 8, 2006
  • #14
the car has 160,000 Km's (100,000 miles) I think it runs a bit rich
 

Strype

Cuthbert catcher
Founding Member
May 11, 1999
61
34
104
Huntsvegas, AL
Feb 8, 2006
#15
  • Feb 8, 2006
  • #15
LMAO... Me throttle got stuck in me 86GT one time and shot a flame outta the exhaust for all of my friends to laugh about!

Put a Fuel Pressure Guage on the rail and see what you're running... and 100,000 miles is low but doesn't compete with 18 years of age my friend!

Murphy's Law applies to Fox Bodies...

^ I think I'll use that in my signature
 
You must log in or register to reply here.

Similar threads

S
Drivetrain Downshifting from 3rd to 2nd issue
  • Scott_S
  • Apr 23, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
35
Views
1K
Fox 5.0 Mustang Tech Oct 12, 2026
limp
T
Drivetrain TREMEC TKX 1–2 Grinding Issue at ~4,000 Miles + Poor Warranty/Customer Service Experience
  • Ttopfoxguy
  • Oct 10, 2026
  • Fox 5.0 Mustang Tech
Replies
5
Views
328
Fox 5.0 Mustang Tech Oct 15, 2026
JMG9350
J
Drivetrain 83’ Glx convertible C5 Trans help!
  • JacksonJared2113
  • Dec 25, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
542
Fox 5.0 Mustang Tech Dec 26, 2025
JacksonJared2113
C
C4 trans help needed
  • CPH89LX
  • Apr 26, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
347
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 28, 2026
CPH89LX
C
  • Locked
Engine Help timing possibly
  • K1tha1
  • Apr 26, 2025
  • Fox 5.0 Mustang Tech
Replies
3
Views
296
Fox 5.0 Mustang Tech Apr 26, 2025
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?