help with canted kazzi heads

[ls1beater4eva]

ok here it is im helping a friend of mine build a dart block 351 and we are running the jegs/kazzi heads with the canted valves in them comp is around 13.5.1 we are useing arp headstuds but the problem we are running into now is the nut wil lscrew on the stud but u cant get a socket on the nut bc it is rite on the side of the casting for the rocker stud hole and if you try and gring it it willl prolly rip the threads out when u tighten the rocker stud has anybody ever used these heads with head studs ? any suggestions or answers for this will be greatly appreciated thanks in advance.

 

[ls1beater4eva]

anybody ??

 

[BlownFiveLiter]

Would a thin wall socket be able to get onto the nut? That's what I used when I installed my TFS heads, not for any particular reason, except that it was the only 12pt deep well socket I had in that size. I thought for sure it was going to break, but fortunately, it didn't. It's Kaase, by the way.

 

[347HO]

Fabricate a spacer, spin the nut down on the stud and spacer... torque it.

And it's KAASE.