help with codes

[bobbyd]

hey guys i recorded a video of me getting some codes on my car only to find out that my digital camera only records 30sec max. I still managed to get some codes recorded on the video can you guys tell me what codes they are.

Also i will try to record all of it using my camcorder to figure out all other codes. thanks

heres the video http://youtube.com/watch?v=st9jboeV_RU

 

[jrichker]

??? I can't tell anything. You need to count the flashes and post the numbers or buy a code reader with a LCD display.


Or for a nicer scanner see http://www.midwayautosupply.com/pc-7208-90-equus-digital-ford-code-reader-3145.aspx – It has a 3 digit LCD display so that you don’t have to count flashes or beeps.. Cost is $30.

 

[bill302]

you have a code #11 System checks OK..... you need to post what happened after the code 11 flashed....the codes will flash 3 times as this first code did thats how you read them it flashed 1 beep then 1 beep then paused which is 11 it will do this 3 times then go to the next code...

 

[bobbyd]

??? I can't tell anything. You need to count the flashes and post the numbers or buy a code reader with a LCD display.


Or for a nicer scanner see http://www.midwayautosupply.com/pc-7208-90-equus-digital-ford-code-reader-3145.aspx – It has a 3 digit LCD display so that you don’t have to count flashes or beeps.. Cost is $30.

thanks yea i think im going to get me one of those since its kind of hard to understand the beats

 

[bobbyd]

you have a code #11 System checks OK..... you need to post what happened after the code 11 flashed....the codes will flash 3 times as this first code did thats how you read them it flashed 1 beep then 1 beep then paused which is 11 it will do this 3 times then go to the next code...

so it plays each code 3 times in a row? didnt that code 11 only do it 2 times?

 

[AnthonyR23]

only flashes each code twice... eg.. 21 45 would be flash flash pause flash break flash flash flash flash pause flash flash flash flash flash break and then it will repeat again...

 

[AnthonyR23]

very easy to understand.. don't waste your money on the reader!!!!

 

[bobbyd]

very easy to understand.. don't waste your money on the reader!!!!

aight I will try it again tomorrow and see what codes i get hopefully I write them down correctly

 

[stephenwilson18]

bill302 is right, code 11 means everything is fine, if it beeps out twice that means that's all the codes it has. Depends on whether you are doing the key on, engine off (KOEO) test or key on, engine running (KOER) codes, you may want to check both and there are some other tests you can do as well with that scanner, Dont waste your money on that other scanner.

 

[bobbyd]

bill302 is right, code 11 means everything is fine, if it beeps out twice that means that's all the codes it has. Depends on whether you are doing the key on, engine off (KOEO) test or key on, engine running (KOER) codes, you may want to check both and there are some other tests you can do as well with that scanner, Dont waste your money on that other scanner.

I was doing the KOEO. I will go and try it now with the engine on and see what i get.