marine_2003 Member Jun 6, 2005 427 0 16 Lake County, FL Oct 31, 2005 #1 Oct 31, 2005 #1 Just got my new Mac control arm bushings, and cant get them in. What should I do?
vikingpower New Member Dec 6, 2004 656 0 0 CWU Ellensburg, WA Oct 31, 2005 #2 Oct 31, 2005 #2 You gotta take them to a machine shop to get them pressed out/ new ones pressed in. I took mine to NAPA
You gotta take them to a machine shop to get them pressed out/ new ones pressed in. I took mine to NAPA
marine_2003 Member Jun 6, 2005 427 0 16 Lake County, FL Oct 31, 2005 #3 Oct 31, 2005 #3 The old ones are already out they fell out when i took the control arms off, but i have to get the new ones pressed in?
The old ones are already out they fell out when i took the control arms off, but i have to get the new ones pressed in?
vikingpower New Member Dec 6, 2004 656 0 0 CWU Ellensburg, WA Oct 31, 2005 #4 Oct 31, 2005 #4 If your new bushings are caseless (I.E. reuse the stock casings already pressed into the control arms) then you dont have to get them pressed in... But if your new bushings have casings its impossible to do it without a machine press
If your new bushings are caseless (I.E. reuse the stock casings already pressed into the control arms) then you dont have to get them pressed in... But if your new bushings have casings its impossible to do it without a machine press
marine_2003 Member Jun 6, 2005 427 0 16 Lake County, FL Oct 31, 2005 #5 Oct 31, 2005 #5 by caseless do you mean the sleeves that run through the center?
vikingpower New Member Dec 6, 2004 656 0 0 CWU Ellensburg, WA Oct 31, 2005 #6 Oct 31, 2005 #6 its a metal sleeve on the outside of the bushing