• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

help with distrutor install

  • Thread starter Thread starter kbradner
  • Start date Start date Jun 14, 2007
K

kbradner

New Member
Nov 12, 2006
5
0
0
Knoxville TN
Jun 14, 2007
#1
  • Jun 14, 2007
  • #1
I have a 88 302 it had a fuel injected dist. so I bought a new one from autozone and it has a plug with a black wire, black wire with red stripe and purple with black stripe. Which wire is what? Also what is the firing order for this motor? I think it is a older motor not sure though. thanks in advance
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Jun 14, 2007
#2
  • Jun 14, 2007
  • #2
You have the wrong distributor. The 86-93 distributors mount the TFI module directly on the distributor. There is no pigtail connector on the distributor to connect to the TFI module.

 
K

kbradner

New Member
Nov 12, 2006
5
0
0
Knoxville TN
Jun 14, 2007
#3
  • Jun 14, 2007
  • #3
this is carb
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Jun 14, 2007
#4
  • Jun 14, 2007
  • #4
kbradner said:
this is carb
Click to expand...

Your first post says EFI distributor and there are no clues in your first post that you are working on a carb car. If you include enough information about what you are working on, it reduces the number of useless answers you get.
 

Hickfied

Member
Nov 9, 2005
413
0
16
Morganton, NC
Jun 14, 2007
#5
  • Jun 14, 2007
  • #5
You'll have the non HO firing order (older one), and you will need to do alot of custom wiring to get rid of the dizzy setup you have now. Like I said in your other thread, get a duraspark ignition box, dizzy, and while your at it a coil for a 1985 Mustang 5.0 (4 barrel I think, not the CFI one when Autozone asks) There is a website somewhere that shows you how to wire your car, which I am sure someone else can lead you too, as I can't remember where it is at the moment.
 
You must log in or register to reply here.

Similar threads

Electrical 91 hatch wiring help needed
  • FastDriver
  • Apr 7, 2026
  • Fox 5.0 Mustang Tech
Replies
2
Views
275
Fox 5.0 Mustang Tech Apr 8, 2026
FastDriver
C
Electrical HELP! 1989 5.0 Stick, Voltage Bleed onto Ignition Trigger wire
  • ChickenDeluxe
  • May 14, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
405
Fox 5.0 Mustang Tech May 24, 2026
ChickenDeluxe
C
Help Identifying Engine Harness Plug
  • FoxbodyRob
  • Feb 7, 2026
  • 2.3L (N/A & Turbo) Tech
Replies
3
Views
330
2.3L (N/A & Turbo) Tech Feb 7, 2026
FoxbodyRob
J
Fox Lost all gauge cluster function after Holley Terminator X install (solved)
  • Justin17383
  • Nov 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
272
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 13, 2026
2000xp8
Resolved 93 Mustang 5.0 - Cranks but does not start
  • dan50
  • Jul 18, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
491
Fox 5.0 Mustang Tech Jul 18, 2026
dan50
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?