Help with Eibach Pro Kit...

9

99 silvr35th

New Member

Jan 23, 2004

52

0

0

Long Island

May 26, 2004

#1

• May 26, 2004

• #1

I spoke to the shop that will be aligning my car after I install the eibach pro kit, the rep. told me that i HAVE TO install a camber caster kit for the alignment to be good. Is this true, as i know many people have said they just installed springs alone and had no problems. Please advise...thanks.

 

TRUEBLUEOVAL

Founding Member

Aug 13, 2001

72

0

0

Long Island, NY

May 26, 2004

#2

• May 26, 2004

• #2

I've had the pro-kit springs in my car 2 1/2 years and almost 30,000 miles now with no cc plates and no alignment. The car seems to drive fine, and the tires have not worn abnormally. However, getting the plates and alignment is probably the correct way, but not necessary.

 

R

Rocketman

New Member

Apr 20, 2004

730

0

0

SoCal

May 26, 2004

#3

• May 26, 2004

• #3

After installing the Pro-Kit, I went to the alignment shop about 3 weeks later after the springs settled. The guy made some adjustment and pulled out a drill to drill out the top plate on the strut tower so he could move the strut a little. I said no way and went and bought a set of BBK C/C plates. After installing the plates and getting aligned, my car drives great. I just bought new 18's and was not going to take a chance with new tires. Basically, its your choice. IMHO, to do the job right, you need C/C plates.

 

01GT eibach

Active Member

Nov 18, 2002

1,075

0

36

Pittsburgh, PA

May 26, 2004

#4

• May 26, 2004

• #4

That is not true. My alignment is dead center within spec w/ no cc plates ... not even close to the limits. Do it. If it turns out that they are right, (i.e., you can not get car in alignment) then get the cc plates installed afterward (that won't happen, though ... not with Pro Kit).

 

9

99 silvr35th

New Member

Jan 23, 2004

52

0

0

Long Island

May 26, 2004

#5

• May 26, 2004

• #5

thanks for the replies...

 

F

flipnsac

Member

Nov 10, 2003

159

0

16

Northern CA

May 26, 2004

#6

• May 26, 2004

• #6

The old rule of thumb was that if your drop exceeded 1.5 inches you will need the CC plates to get proper alignment and anything less than 1.5 inches was OK without CC plates.

 

6

68 & 00 GT

New Member

May 14, 2003

2,407

1

0

HOUSTON TEXAS

May 26, 2004

#7

• May 26, 2004

• #7

had mine on about 3.5 years w/ no CC plates, but you still need to have a good alingment at all times anyway.

My car always has alingned w/ in factory specs, but I beleive to be absolutely perfect you will need CC plates.

 

2

281Ponies

New Member

Nov 14, 2003

190

0

0

May 26, 2004

#8

• May 26, 2004

• #8

Another 2 years on the Pro-Kit without CC plates. Had a shop check the alignment after a few weeks and everything was within spec. Car handles fine and no abnormal tire wear.

-Cale