Help with Headers please

my orange-gt · Oct 11, 2004

what is the best headers and brand for my 04 gt 5spd and how much do they normally cost to buy and install

tomustang · Oct 11, 2004

long tubes, but everything depends on what you want AND how much you really want to spend for it. installing is a hefty price cause insists on removing the K member.

SlapStick1999GT · Oct 11, 2004

When i went to get some headers they told me it will be about 600 to 800 bucks to install you have to jack up the engine to install the new headers. If you are looking for some thing that sounds sweet get some mufflers and a H pipe. the long tubes are really expensive and the price for installing you could put that tword a blower. Not to say they would not sound nice and give you some good hp but if you have little to spend for get it.

65straightsick · Oct 11, 2004

Can they not be installed by yourself? I would think that would save a bunch of money there. Or getting a friend to help or something. The only thing I would ever let a shop do is alignment, paint, or dyno tuning. Just cheaper that way. Your money though.....

ocmustang · Oct 11, 2004

The ultimate header - Bassani Stainless Steel Midlength Headers. They will cost you aroung 650 $$ but they are worth every penny. No leaks and they blow away most other header designs in hp. Going to long tubes ok but watch out for dips they like to bend.

Ben99GT · Oct 12, 2004

ocmustang said:
The ultimate header - Bassani Stainless Steel Midlength Headers. They will cost you aroung 650 $$ but they are worth every penny. No leaks and they blow away most other header designs in hp. Going to long tubes ok but watch out for dips they like to bend.

I have a hard time believing that just by looking at the Bassani's collector, it just looks restrictive, not smooth at all and it reduces in size way too much.

I'd say Hookers, Flowtechs, Jet Hots or SLP's should easily make the most power.

mogs01gt · Oct 12, 2004

ocmustang said:
The ultimate header - Bassani Stainless Steel Midlength Headers. They will cost you aroung 650 $$ but they are worth every penny. No leaks and they blow away most other header designs in hp. Going to long tubes ok but watch out for dips they like to bend.

Nothing but total bull**** in those post.

If you want real power. Get long tubes and nothing else.

stangman · Oct 12, 2004

ocmustang said:
The ultimate header - Bassani Stainless Steel Midlength Headers. They will cost you aroung 650 $$ but they are worth every penny. No leaks and they blow away most other header designs in hp. Going to long tubes ok but watch out for dips they like to bend.

i've put lt's on two different mustangs & both have been lowered (1.5"). I have never hit my headers on anything on either car. but whenever i go to put headers on my 05, whenever i decide to trade mine, it will be between mac ceramic coated lt's (for power) or the basanni midlengths (for convienience). knowing me i'll prolly go the lt route again though

ocmustang · Oct 12, 2004

Its a quality issue too. Not just hp. Take a look at bassanis headers after a few years - they look the same. Some X brands are beat up after a few hundred miles. you gotta love those mig welded brand x headers comin off an assembly line & then maybe youll appreciate quality - qoute my orange gt - what are the best headers for an o4 gt or are we talkin about an 87 5.0

back_in_black · Oct 12, 2004

I just had mac lt headers and a mac catted h pipe put on, it sounds awesome !!(I have magnaflow catback), anyway, I had to have a new engine put in by ford so I had the tech install the lt's and h pipe at the same time, it was still $560.00 in labor.

mogs01gt · Oct 12, 2004

ocmustang said:
Its a quality issue too. Not just hp. Take a look at bassanis headers after a few years - they look the same. Some X brands are beat up after a few hundred miles. you gotta love those mig welded brand x headers comin off an assembly line & then maybe youll appreciate quality - qoute my orange gt - what are the best headers for an o4 gt or are we talkin about an 87 5.0

If you spend 650 dollars for mid lengths you are either a rich bitch or smoking a hell of a lot of crack.

GreekStang85 · Oct 12, 2004

what kind of LT's do you have mogs???

mogs01gt · Oct 12, 2004

GreekStang85 said:
what kind of LT's do you have mogs???

MAC, I go for performance.

01mgvert · Oct 12, 2004

I bought Hooker LT headers ($700) and o/r x-pipe ($140). It cost another $800 for installation. You can do it yourself but it is a real pita. I gained 23 rwhp from this combination. By far, the best mod to date.

GreekStang85 · Oct 12, 2004

mogs01gt said:
MAC, I go for performance.

what coating do you have on it, do you have the basic hts coating or the "ceramac" coating, i want to get bbk's but they are a bit too pricey.

Help with Headers please

my orange-gt

New Member

tomustang

Psychotic Member

SlapStick1999GT

New Member

65straightsick

New Member

ocmustang

New Member

Ben99GT

mogs01gt

stangman

ocmustang

New Member

back_in_black

New Member

mogs01gt

GreekStang85

Member

mogs01gt

01mgvert

New Member

GreekStang85

Member

Similar threads

Help with Headers please

New Member

Psychotic Member

New Member

New Member

New Member

New Member

New Member

Member

New Member

Member

Similar threads

Privacy & Transparency

Privacy & Transparency