• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Help with my cam selection

  • Thread starter Thread starter jb1dsl
  • Start date Start date Feb 23, 2007

jb1dsl

Member
May 24, 2004
566
0
17
Marianna, Fl.
Feb 23, 2007
#1
  • Feb 23, 2007
  • #1
I need some opinions for my cam. It is a roller 347, 10.8\1 c.r., edelbrock rpm heads, edelbrock rpm intake,c4 w\2500 stall, 3.55 rear gears.

Crane recommended number: 449561 222\240@50,112 lobe sep, 563\584lift
Comp cams recommended: 35-430-8 224\224@50, 110 lobe sep, 560\560 lift

I was also looking at a FMS X303, trickflow stage (what stage), edelbrock rpm.

My heads will accept 575 lift so Im wanting to stay away from the crane cam and want one off the shelf not a custom grind.

This car is a street car, it may never see a track so it needs to be street friendly. I will not be driving it far distances, 30 miles max, and gas mileage is not a factor

Give me your opinions on these cams and other choices, please.

Thanks
 

Jason 302

10 Year Member
Aug 9, 2003
685
71
68
Newark, Ohio
Feb 23, 2007
#2
  • Feb 23, 2007
  • #2
Heres some CompCam camshafts that I really like the specs on:

XE276HR-12: 224*/230* - .544"/.544" - 112* lsa - 2200 to 6200rpm
XE274HR-12: 224*/232* - .555"/.565" - 112* lsa - 2200 to 6200rpm

Edit: The X303 might not be a bad choice, although I think the above cams are better. If you go Trick Flow I would go with the stage 1 (opt for 1.7 rockers if you choose), the stage 2 is actually more of a blower grind (very wide LSA), and the stage 3 is too much. The second cam you listed with it's 110* LSA would be a lopier idle, which might not be what you're looking for in a street car.
 

jb1dsl

Member
May 24, 2004
566
0
17
Marianna, Fl.
Feb 23, 2007
#3
  • Feb 23, 2007
  • #3
Does it matter much that the xe274hr and xe276hr are designed for efi and im running a carb?
 

Jason 302

10 Year Member
Aug 9, 2003
685
71
68
Newark, Ohio
Feb 23, 2007
#4
  • Feb 23, 2007
  • #4
Well hard to say really, I'm no cam expert, but I would say any roller cam is going to be designed around fuel injection considering they both switched in the mid 80's. I usually try to look more at the heads, intake, and intended purpose when choosing a cam. I don't know if carb or fuel injection would be an issue....something to ask a custom cam grinder or maybe on of the manufacturers....I'm sure there are probably little differences they can do between the two.
 

jb1dsl

Member
May 24, 2004
566
0
17
Marianna, Fl.
Feb 23, 2007
#5
  • Feb 23, 2007
  • #5
The comp cams one is designed for a carb, any opinions on the z303 (camzilla)?

Comp cams makes the magnum roller series for carbs
 
You must log in or register to reply here.

Similar threads

6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
5
Views
1K
1965 - 1973 Classic Mustangs -General/Talk- Oct 19, 2026
mattcrp1
M
I
289 cam break in help
  • iaff284
  • Aug 19, 2022
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
0
Views
869
1965 - 1973 Classic Mustangs -General/Talk- Aug 19, 2022
iaff284
I
C
Cam question
  • ClayBelt
  • Oct 8, 2021
  • SN95 4.6L Mustang Tech
Replies
6
Views
1K
SN95 4.6L Mustang Tech Nov 16, 2022
Yel2002GTAuto
Y
D
Building a 302 and Require Input
  • dduran
  • Jun 15, 2020
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
9
Views
6K
1965 - 1973 Classic Mustangs -General/Talk- Jul 18, 2020
DBegley
D
C
small block 427, what heads should I run
  • Chosen7
  • Apr 22, 2019
  • Classic Mustang Specific Tech
Replies
16
Views
15K
Classic Mustang Specific Tech May 16, 2019
Hack
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?