Help with removing upper intake.

F

fujifrench2k4

New Member

Apr 10, 2004

17

0

2

Lutz

Apr 9, 2005

#1

• Apr 9, 2005

• #1

Aight i got all the bolts off besides the number 5 Bolt. And well it had small nut on it that i removed , then theres a line thats attached to the upper that is on top of the other nut holding the intake on. Know what Im talking about? Anyways if you do , how did you get that line off so i can get to the nut?

 

F

fujifrench2k4

New Member

Apr 10, 2004

17

0

2

Lutz

Apr 9, 2005

#2

• Apr 9, 2005

• #2

Anybody?

 

M

MATREDGT

New Member

Apr 5, 2003

59

0

0

Shelby Twp., Michigan

Apr 9, 2005

#3

• Apr 9, 2005

• #3

I just did this last night. That line you are speaking of is a support of something but I don't remember what. Anyway follow it to the end of it and you will see another nut holding the other end down. Take that nut off and your in business. Hope this helps.

 

conartist

Member

Dec 4, 2002

77

0

6

Windsor, Ontario, Canada

Apr 9, 2005

#4

• Apr 9, 2005

• #4

ok, lets see here from memory i can recall.

- remove air intake tube
- 4 torx screws for upper plate
- 5 of 6, 1/2" bolts for intake
- 6th in stud, remove the nut, ground wire, 1/2" stud below
- throttle cable, cruise cable
- unplug egr, tps, iac
- front of intake, canister purge vac. hose, (could have clamp)
- back of intake, thick line to vac. tree, two small lines, FPR, canister
- coolant lines to spacer

umm, i think that's it.

 

F

fujifrench2k4

New Member

Apr 10, 2004

17

0

2

Lutz

Apr 9, 2005

#5

• Apr 9, 2005

• #5

Yea thanks for the help. I finally got the upper off and saw its just some support bar.