Help With Rocker Arm

88LX5.Oh said:

Might be that the push rod guide plates aren't lined up right causing the pushrod to slightly shift off to one side, which will cause the rocker arm itself to be off to one side. They were talking about it on one of the car shows on tv and said that sometimes when they're torqued down from the factory, they'll shift to one side. Best way to fix this is to loosen the guide plate back up, put something between the plate and somewhere on the head (to keep the guide plate a set distance that won't move when being torqued) and then tighten the guide plate back down. If I find a video of it, I'll post it for you and you can see if that's what's causing any geometry issues.

Click to expand...