Help with Stall please

[jdrake19]

With mods in sig, and being a daily driver, what stall would you recommend? If you could, tell me what you think and link me to a website that sells/gives more info. I couldn't find a whole lot.

Thanks,

Jake

 

[Rocketman]

Everything you need to know. http://www.converter.com/

 

[streetstang03]

at least a 3000 rpm TC

 

[jdrake19]

3,000? That seems a little much, but then again i'm clueless about TC's. Thanks guys!!!

Jake

 

[CobraM23]

3,000? That seems a little much, but then again i'm clueless about TC's. Thanks guys!!!

Jake

Ive got a PI 3000. Its not as bad as it seems. You really cant tell when youre cruising around, but when you floor it, its Im actually gonna get mine restalled to around 3600 this summer.

 

[hognutz]

Call the coverter company. Not many people on this board are going to have a full understanding of torque converters. I would let the experts give you a recomenation based on you needs.

Cams and torque converters can get you in trouble if you just pick #'s sometimes.

 

[Mike97gt]

3000 is best converter for you. don't let peopel tell you different. our cars are kind of high revers.

the way too figure it out is find out your peak tourqe and go with the stall speed that will flash at that. a 3000 stall will flash around 3400 rpm's

some will say your car will be at 3k all the time. this is also false. it will only climb that high when your under moderate load or higher.